GANTER Pomelli di serraggio（pagina 2）

?* Informazioni su tempi di consegna e prezzi

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Hand knobs, casting only

  GANTER

  Stainless Steel-Hand knobs, casting only

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.96 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Indexing mechanisms

  GANTER

  Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.
  Besides the standard scale (Type AS) the control knob version may be supplied with any scale.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	123.10 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Knurled screws

  GANTER

  The knurling of the Stainless Steel-Knurled screws GN 535 allows a use in an environment with hygienic requirements.
  Specification

  • Sconto volumi elevati

  A partire da∗ ：	11.24 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Knurled screws with recessed stud for loss prevention

  GANTER

  Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	5.22 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Star knobs

  GANTER

  Stainless Steel-Star knobs

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.36 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Star knobs AISI 304

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.44 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334.4 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.18 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs AISI 316L (A4)

  GANTER

  Stainless Steel-Star knobs GN 5335.4 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	24.74 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs AISI 316L (A4), Casting only

  GANTER

  Stainless Steel-Star knobs GN 5335.4 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	25.50 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Star knobs with threaded bolt AISI 304

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.94 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs with threaded bolt AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.44 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs with threaded stud

  GANTER

  Stainless Steel-Star knobs with threaded stud GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	21.98 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs, Casting only

  GANTER

  Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.86 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Star knobs, highly polished

  GANTER

  Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	26.16 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Star knobs, matt shot-blasted

  GANTER

  Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.90 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Three-lobe knobs AISI 303

  GANTER

  Stainless Steel-Three-lobe knobs GN 5345 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied.

  • Sconto volumi elevati

  A partire da∗ ：	26.86 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Three-lobe knobs, AISI 316L

  GANTER

  Stainless Steel-Three-lobe knobs GN 5345.4 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied.

  • Sconto volumi elevati

  A partire da∗ ：	29.44 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Three-lobe knobs, Casting only, AISI 303

  GANTER

  Stainless Steel-Three-lobe knobs GN 5345 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied.

  • Sconto volumi elevati

  A partire da∗ ：	28.22 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Three-lobe knobs, Casting only, AISI 316L

  GANTER

  Stainless Steel-Three-lobe knobs GN 5345.4 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.18 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Stainless Steel-Wing nuts

  GANTER

  Stainless Steel-Wing nuts

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	5.72 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with ball pin

  GANTER

  Star knobs GN 6336.11 have a ball pin whose diameter is smaller than the core diameter of the thread.
  The thrust pads are supplied unmounted.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.06 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with loss protection

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	6.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with loss protection

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.56 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with movable thrust pad

  GANTER

  Star knobs GN 6336.12 have a ball pin whose diameter is smaller than the core diameter of the thread.
  The movable thrust pad is easily clipped on and taken off.
  The thrust pads are supplied unmounted.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.08 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with pivot

  GANTER

  Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.70 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with protruding Stainless Steel bushing

  GANTER

  Star knobs GN 6336.1 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.02 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs with stainless steel insert

  GANTER

  Star knobs with stainless steel insert

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.10 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Star knobs, Aluminum

  GANTER

  Star knobs GN 5336 are forged, therefore a close grain structure is maintained providing a high tensile strength and a smooth surface.
  Original ELESA design, now produced in metal in agreement with ELESA s.p.a.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	6.76 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Aluminum

  GANTER

  Star knobs, Aluminum

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	7.44 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Aluminum with Stainless Steel-Threaded bolt

  GANTER

  Star knobs, Aluminum with Stainless Steel-Threaded bolt

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	13.52 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Brass insert

  GANTER

  Star knobs, Brass insert

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1.08 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Cast iron

  GANTER

  Star knobs, Cast iron

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.98 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Cast iron / Aluminum, without bore

  GANTER

  Star knobs cast iron (GG) or Aluminum (AL) plastic coated on request.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1.46 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, cast, iron, with steel threaded bolt steel

  GANTER

  Star knobs, cast, iron, with steel threaded bolt steel

  • Sconto volumi elevati

  A partire da∗ ：	8.66 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Duroplast

  GANTER

  Star knobs GN 6336.1 with bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Star knobs, Hygienic Design

  GANTER

  GN 5435 star knobs are intended for use in hygiene areas. The sealed mounting surface enables fastening without dead spaces. The high quality finish and the large corner radii prevent adherence of dirt and facilitate cleaning.

  • Sconto volumi elevati

  A partire da∗ ：	33.54 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Plastic

  GANTER

  Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	0.90 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, plastic, threaded bolt Stainless Steel

  GANTER

  Star knobs GN 6336.5 comply with DIN 6336 type L.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1.32 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, plastic, with protruding Stainless Steel bushing, Stainless Steel-Th

  GANTER

  The star knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.80 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, plastic, with protruding steel bushing, with threaded bolt steel

  GANTER

  The star knobs have an immaculate contact or clamping surface thanks to the protruding steel bushing.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, plastic, with threaded bolt steel

  GANTER

  Star knobs GN 6336.4 comply with DIN 6336 type L.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	0.76 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Stainless Steel

  GANTER

  Star knobs, Stainless Steel

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.12 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Stainless Steel, without bore

  GANTER

  Star knobs, Stainless Steel, without bore

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	7.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Technopolymer, with protruding Stainless Steel bushing

  GANTER

  Star knobs GN 6336.2 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Sconto volumi elevati

  A partire da∗ ：	2.80 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Star knobs, Technopolymer, with protruding steel bushing

  GANTER

  Star knobs GN 6336.2 with bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Sconto volumi elevati

  A partire da∗ ：	1.52 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...