GANTER Cerniere

?* Informazioni su tempi di consegna e prezzi

• 

  Cerniere per porte / filettatura femmina / zinco pressofuso / GN 139.2 / GANTER

  GANTER

  With the exception of the connector plug, hinges without safety switch GN 139.2 do not differ in their external appearance from hinges with safety switch GN 139.1. With the concealed screw connection at the back, the hinge is also tamper-proof.
  The compact design combines safety and attractive appearance.
  The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	43.20 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere per porte con interruttore di sicurezza / filettatura interna / acciaio inox / GN 139,5, tipo CK / GANTER

  GANTER

  Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof. Hinges GN 139.6 without switching function act as additional hinges, e.g. for larger doors or gates where several hinges are required.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	690.86 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo /lamature / acciaio / GN 129.3 / GANTER

  GANTER

  Hinges GN 129.3 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  By using cylinder screws DIN 912, they are conveniently fixed using threads on the user side or by using through screws for different clamping thicknesses.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	24.52 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / filettatura interna / asimmetriche / zinco pressofuso / GN 138 / GANTER

  GANTER

  With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish appearance is important.
  The concealed and tamper-proof mounting from the rear highlights and enhances the special appearance of the hinge.
  The dimensions l1 / l2 and the drill hole spacings m1 / m2 match the usual hinges GN 237 / GN 237.1 and can replace these.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	9.04 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere a coppia / svasature coniche / zinco pressofuso / GN 437 / GANTER

  GANTER

  The setscrew in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating range. The rotation of doors and flaps is so inhibited, also preventing the inadvertent movement.
  The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness.
  Owing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.00 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte a innesto / svasature coniche / zinco / GN 337 / GANTER

  GANTER

  Hinges detachable, Zinc die casting

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.32 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / fori asolati / asimmetriche / zinco pressofuso / GN 161 / GANTER

  GANTER

  Hinges GN 161 have been designed for commercially available profile rails.
  With three different types of hinges only, 66 different groove distances „n“ can be accommodated. To achieve this the positioning elements are set in specially marked recesses in the hinge wings.
  The rectangular (8x10 mm) positioning elements, two pieces per hinge wing, will prevent a misalignment. They will also carry the weight of the door.
  For screwing the hinges onto the profile rails, special T-Nuts are used.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.80 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo / saldabili / distanziali in ottone / alluminio / GN 128.2 / GANTER

  GANTER

  Hinges GN 128.2 are produced from drawn weldable profiled Aluminuim extrusions.
  The pin is fixed in the lower half.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	5.68 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere a pressione ad angolo / saldabili / ottone Anelli distanziatori / acciaio / GN 128 / GANTER

  GANTER

  Hinges GN 128 are produced from drawn weldable profiled steel extrusions.
  Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel pin allows the easy installation when attaching several hinges in parallel or if the door is very heavy.
  The upper half of Type STS hinge has an additional lubricating nipple DIN 71412-D which allows the hinges to be lubricated without dismantling the hinges.
  
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.60 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere per porte / filettatura femmina / zinco pressofuso / GN 139.2, tipo AK,CK / GANTER

  GANTER

  Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
  The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	170.88 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / filettatura interna / asimmetrica / zinco pressofuso / GN 139.1 / GANTER

  GANTER

  Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
  The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	172.86 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere per porte con interruttore di sicurezza / filettatura femmina / acciaio inox / GN 139.5, Tipo A,B,C / GANTER

  GANTER

  Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	697.36 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / svasature coniche / in zinco pressofuso / GN 238 / GANTER

  GANTER

  The adjustable hinges GN 238 allow the technically and visually perfect positioning and alignment of a door in its frame.
  The steel adjusting disc has a cutting ring in its underside which cuts into the radial fins of the zinc die-cast wings when the countersunk screw is tightened, virtually creating a form-lock that prevents adjusting the hinge after mounting.
  The covers conceal the fixing elements and lend the hinge an attractive optical appearance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.26 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo / viti / acciaio / GN 129.2 / GANTER

  GANTER

  Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.66 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere ad angolo / viti / acciaio / GN 129 / GANTER

  GANTER

  Le cerniere GN 129 vengono utilizzate per le porte a filo con la parete esterna. La cerniera viene pertanto normalmente collocata a lato della porta.Nella versione a due pezzi, la porta può essere sganciata su due cerniere disposte allo stesso modo.Le cerniere a tre pezzi, normalmente non sganciabili, mediante il fissaggio dall’interno sono adatte in particolare per le porte e gli sportelli che non possono essere smontati dall’esterno, c

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	9.20 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / svasature coniche / asimmetriche / materiale selezionabile / rivestimento selezionabile / GN 237 / GANTER

  GANTER

  Hinges GN 237 with extended hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	7.78 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo / filettatura interna / zinco / GN 161.1 / GANTER

  GANTER

  Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
  During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
  For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
  The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.20 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo / filettatura femmina / zinco / GN 161.2 / GANTER

  GANTER

  Hinges GN 161.2 are a variant with highly attractive design. The fixing screws are invisible.
  During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.40 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / svasature coniche / -90°, 180° / materiale selezionabile / rivestimento selezionabile / GANTER

  GANTER

  GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	6.20 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Piastre di base per cerniere / angolo / zinco pressofuso / 139.4-101 / GANTER

  GANTER

  The angled mounting plate GN 139.4 allows the hinges GN 139.1 / GN 139.2 to be attached between frame and door, i.e. the door gap.
  The long slotted holes allow the attachment to profile
  systems.
  Countersunk screws for fixing the hinges to the mounting plate are
  included part of the order.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	26.52 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Piastre di base per cerniere / fori asolati / acciaio / zincato / 139,3-170 / GANTER

  GANTER

  The flat mounting plate GN 139.3 allows the hinges GN 139.1 / GN 139.2 to be attached from the front.
  The long slotted holes allow the attachment to profile
  s ystems.
  Countersunk screws for fixing the hinges to the mounting plate are
  included part of the order.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	38.10 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / svasature coniche / laminate / acciaio / zincato, passivato blu / GN 136 / GANTER

  GANTER

  Sheet metal hinges GN 136 are low-cost designs for low-load applications.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.16 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere per porte / filettatura interna / acciaio inox / 139.6-76-126 / GANTER

  GANTER

  With the exception of the connector plug, the hinge without safety switch GN 139.6 do not differ in their external appearance from hinges with safety switch GN 139.5. With the concealed screw connection at the back, the hinge is also tamper-proof.
  The compact design combines safety and attractive appearance.
  The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	530.48 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo / viti / acciaio inox / GN 129.2 / GANTER

  GANTER

  Stainless Steel-Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	33.36 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere ad angolo / viti / acciaio inox / GN 129,5 / GANTER

  GANTER

  Stainless Steel-Hinges GN 129.5 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	28.12 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / svasature coniche / acciaio inox / GN 237 / GANTER

  GANTER

  GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	12.44 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere a innesto piatte / svasature coniche / -90°, 180° / acciaio inox / GN 337 / GANTER

  GANTER

  Stainless Steel-Hinges detachable

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.20 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere ad angolo / saldabili / anelli intermedi in ottone / acciaio inox / GN 128.2 / GANTER

  GANTER

  Hinges GN 128.2 are produced from drawn weldable profiled Stainless Steel extrusions.
  The pin is fixed in the lower half.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	16.92 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / non forate / laminate / acciaio inox / grezzo / GN 136 / GANTER

  GANTER

  Stainless Steel-Sheet metal hinges GN 136 are low-cost designs for low-load applications.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	2.98 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / asimmetriche / laminate / acciaio inox / grezzo / GN 1364 / GANTER

  GANTER

  Pointed Stainless Steel-Sheet metal hinges GN 1364 are characterized by their compact and universal dimensioning as well as their attractively shaped design. The materials used also permit applications in aggressive environments.Type B is fastened via the existing through-holes using screws or rivets.

  • Sconto volumi elevati

  A partire da∗ ：	9.50 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / asimmetriche / laminate / acciaio inox / grezzo, zincato, passivato blu / GN 136 / GANTER

  GANTER

  GN 136 Stainless Steel-Sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.Type A can be fixed in place by welding or by using holes made by the customer.

  • Sconto volumi elevati

  A partire da∗ ：	3.18 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / non forate / saldabili / laminate / acciaio inox / grezzo / GN 1362 / GANTER

  GANTER

  Stainless Steel-Sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.

  • Sconto volumi elevati

  A partire da∗ ：	5.32 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere a perno multiplo / fori lunghi / 7 assi / laminato / acciaio inox / lucidato opaco / GN 1362 / GANTER

  GANTER

  Stainless Steel-Multiple-joint hinges GN 7237 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.
  
  Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
  Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one type L and one type R are used per opening. For higher loads, e.g. from large hatches, these can be supplemented with additional hinges of either type.

  • Sconto volumi elevati

  A partire da∗ ：	109.78 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / fori oblunghi / acciaio inox / GN 7237 / GANTER

  GANTER

  Stainless Steel-Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.

  • Sconto volumi elevati

  A partire da∗ ：	17.36 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Cerniere piatte / asimmetriche / laminate / acciaio / zincato, passivato blu / GN 235 / GANTER

  GANTER

  GN 136 sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.

  • Sconto volumi elevati

  A partire da∗ ：	2.38 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / non forate / saldabili / laminate / acciaio / grezzo / GN 1366 / GANTER

  GANTER

  Hinges GN 1366 are made of rolled or drawn steel profiles and are very robust.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.

  • Sconto volumi elevati

  A partire da∗ ：	12.10 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / fori asolati / zinco pressofuso / GN 1366 / GANTER

  GANTER

  Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.

  • Sconto volumi elevati

  A partire da∗ ：	12.36 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Piastre in acciaio inox con prigionieri filettati, cerniere GN GN GN

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	12.00 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Piastre inox fori filettati, cerniere GN GN GN

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	9.66 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere, profili in alluminio / elementi per pannelli, in tre parti

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	30.26 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere multi-link in acciaio inox (GN 7237)

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	110.76 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere, registrabili, pressofusione di zinco

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	18.10 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniera a più snodi, interna, angolo di apertura in alluminio

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	321.50 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere in acciaio inox

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	24.10 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Set bulloni, ala cerniera GN

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	3.02 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

Loading...