GANTER Leve di serraggio

?* Informazioni su tempi di consegna e prezzi

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers, Zinc die casting, Bushing, Stainless Steel

  GANTER

  Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	7.46 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Adjustable clamping levers, Steel

  GANTER

  Adjustable clamping levers GN 6337.3 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The insert is connected by the lever via serrations in the ball bore which can be disengaged.
  
  Pushing the lever down, disengages the serrations and the lever can be swivelled to the ideal clamping position. Engagement is achieved by releasing the lever.
  Should a rotation of 360° not be possible, the insert can be lightly screwed in (after the lever is disengaged) via a slot in the knurled screw.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.56 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable clamping levers, Steel

  GANTER

  Adjustable clamping levers GN 99.2 are known for their small dimensions.
  They are for use in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded bolt insert which engages in the hub with its own serrations.
  By depressing the clamping lever the serrations are disengaged freeing it for re-positioning in the most convenient position. When releasing the lever the serrations will re-engage automatically.
  Should a rotation of 360° not be possible the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.40 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable flat tension levers with tabbed bushing, Steel

  GANTER

  The overall height of flat tension levers GN 125 is reduced to a minimum.
  As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	24.90 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Adjustable flat tension levers with tabbed stud, Stainless Steel

  GANTER

  The overall height of Stainless Steel-Flat tension levers GN 125.5 is reduced to a minimum.
  As all other adjustable levers, they are ideal whenever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	35.52 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Adjustable flat tension levers with threaded stud, Stainless Steel

  GANTER

  The overall height of Stainless Steel-Flat tension levers GN 125.5 is reduced to a minimum.
  As all other adjustable levers, they are ideal whenever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	35.94 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable flat tension levers with threaded stud, Steel

  GANTER

  The overall height of flat tension levers GN 125 is reduced to a minimum.
  As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	25.16 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers with increased clamping force

  GANTER

  Adjustable hand levers GN 300.4 are produced with a clamping area which is linked via a thrust ball bearing to the bush and screw respectively of the clamping lever. This has led to the following advantages:
  - Doubled clamping force through vastly reduced friction.
  - There is no movement on the contact area between adjustable hand lever and component which greatly reduces any marking on the clamping area.
  - In addition a reduced creep factor has been achieved by the increased preload.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	29.80 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers with special tipped threaded studs

  GANTER

  Adjustable hand levers GN 306 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever disengages the serrations, allowing it to be swivelled to the ideal clamping position. When the lever is released, the serrations
  automatically re-engage.
  The brass and plastic tipped studs (Types MS / KU) help to avoid damage to the work piece being clamped.
  The hardened tipped stud (Type DZ) provides an oval point-shaped pressure point.
  The swivel thrust pad (Type KD) can easily be snapped on and taken off.
  Pad is supplied unmounted.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	8.28 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers, Internal parts Stainless Steel

  GANTER

  Adjustable hand levers GN 303.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be dis-engaged.
  The push button is a design element that offers an easy disengagement. Its use is limited to applications where dismantling of the lever for installation is not required.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.88 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers, straight lever

  GANTER

  Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space.
  Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	5.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers, Zinc die casting, bushing steel

  GANTER

  Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.68 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel

  GANTER

  Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	7.46 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable hand levers, Zinc die casting, with threaded stud steel

  GANTER

  Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.72 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable Stainless Steel-Hand levers, threaded bushing

  GANTER

  Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where „agressive“ surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
  Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
  Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	14.96 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Adjustable Stainless Steel-Hand levers, threaded bushing, electropolished

  GANTER

  Adjustable hand levers GN 300.6 with full Stainless Steel-Handle, correspond to applications where „agressive“ surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
  Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
  Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.38 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable Stainless Steel-Hand levers, threaded stud

  GANTER

  Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
  Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
  Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.48 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Adjustable Stainless Steel-Hand levers, threaded stud, electropolished

  GANTER

  Adjustable hand levers GN 300.6 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
  Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
  Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	19.02 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ball levers, Steel

  GANTER

  The official DIN standard sheet specifies additional sizes 200 - M24 / B24.

  • Sconto volumi elevati

  A partire da∗ ：	9.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamp nuts with double lever, Steel

  GANTER

  Clamp nuts with double lever, Steel

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	6.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamp nuts, Steel

  GANTER

  Clamp nuts, Steel

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping bolts, downward clamping, Stainless Steel

  GANTER

  Stainless Steel-Clamping bolts GN 918.7 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	83.52 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping bolts, downward clamping, Steel

  GANTER

  Clamping bolts GN 918.2 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	48.80 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Clamping bolts, upward clamping, Stainless Steel

  GANTER

  Stainless Steel-Clamping bolts GN 918.6 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	83.52 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping bolts, upward clamping, Steel

  GANTER

  Clamping bolts GN 918.1 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	48.80 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Clamping kits

  GANTER

  With clamping kits GN 511.1 swivel clamp mountings GN 482 can be combined with T-Swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k-dimensions into swivel clamp mounting
  joints.
  The centering bushing positions the swivel clamp mountings in relation to each other. During assembly, the knurled threaded bushing is inserted by the clamping screw itself and by pressing into one of the two swivel
  clamp mountings and so serves to clamp the articulated joint.
  The matching clamping kits are shown in the dimensional tables of the appropriate swivel clamp mountings.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.66 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Clamping kits for connector clamps, Zinc die casting

  GANTER

  The clamping kits GN 911 replace the hexagon socket screws DIN 912 of the connector clamps.
  The table of dimensions of the connector clamps shows the corresponding clamping kits for each clamping thread.
  The distance bushing is included part of the order.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	12.62 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping kits, Zinc die casting / Stainless Steel

  GANTER

  For clamp mountings, the clamping kits GN 511 replace the hexagon socket screw DIN 912. It is used on all clamping points where repeated clamping actions are required, e.g. for adjusting a stop mechanism.
  
  The matching clamping kits for each clamping thread are listed in the dimensional tables of the clamp mountings.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	7.26 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam with internal thread, Lever steel

  GANTER

  Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.22 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam with internal thread, Lever zinc die castin

  GANTER

  Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam, clamping forces of up to 8 kN can be reached.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	8.76 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam with threaded stud, Lever steel

  GANTER

  Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.62 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927, clamping forces of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	9.98 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam, Lever Stainless Steel

  GANTER

  Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-internal thread are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
  There are no loose components since they are all assembled and mounted in their correct order.
  The salient points of type A are as follows:
  The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
  This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
  With these clamping levers with eccentrical cam GN 927.5, thrusts of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	12.36 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam, Lever Stainless Steel

  GANTER

  Stainless Steel-Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-threaded stud are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
  There are no loose components since they are all assembled and mounted in their correct order.
  The salient points of type A are as follows:
  The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
  This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
  With these Stainless Steel-Clamping levers with eccentrical cam GN 927.5 , thrusts of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	14.26 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-internal thread are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam, clamping forces of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	10.68 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Clamping levers with eccentrical cam, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-threaded stud are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.4 , clamping forces of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	12.42 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Clamping levers, Stainless Steel

  GANTER

  Clamping levers, Stainless Steel

  • Sconto volumi elevati

  A partire da∗ ：	9.54 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Clamping levers, Steel

  GANTER

  The official DIN standard sheet specifies additional sizes 40 - M5 / B5.

  • Sconto volumi elevati

  A partire da∗ ：	6.48 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Control levers, Steel

  GANTER

  The cover hides fasteners (see assembly instructions) and provides a printing facility for any symbol or logo.
  On assembly, the cover is pushed in by hand and can be removed with a screw driver via a suitable slot.
  Control levers GN 750 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	20.56 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Double cam levers, Stainless Steel

  GANTER

  Stainless Steel-Double cam levers GN 917.1 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
  The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	77.82 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Double cam levers, Steel

  GANTER

  Double cam levers GN 917 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
  The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	52.60 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Eccentrical cams, radial clamping, Stainless Steel

  GANTER

  Eccentrical cams GN 918.5 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
  The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	80.88 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Eccentrical cams, radial clamping, Steel

  GANTER

  Eccentrical cams GN 918 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
  The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	54.30 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Safety tension levers, Steel

  GANTER

  Safety tension levers GN 312 are used on such applications where a thoughtless or mistaken releasing or re-positioning of the tension lever could lead to an accident.
  The lever in its rest position is not connected with the internal spindle and can be rotated unhindered.
  The tension lever engages in the serration only after pushing it down, thus allowing clamping or unclamping.
  The "freewheel" position is re-established as soon as the handle is released.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	23.36 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Short clamping levers, Steel

  GANTER

  Short clamping levers, Steel

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	8.56 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

Loading...