Viti a ricircolo di sfere（pagina 2）
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 8 / passo 1 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
[Dust-proofing and lubrication.]
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 657.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Chiocciole per viti a ricircolo di sfere / dado compatto / BLK
THK
[Features]
· Uses an end cap method for high speed rotation, providing stable operation.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 381.90 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Chiocciole per viti a ricircolo di sfere / dado compatto / diametro 10 - 50 / passo 4 - 16 / BTK
THK
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 185.90 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Chiocciole per viti a ricircolo di sfere / dado compatto / WTF
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
· After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
· Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
· After rolling is completed, the screw shaft is treated with either high frequency or charcoal immersion quenching, followed by a special surface grinding and finishing process. Due to the manufacturing methods used, this product is comparatively cheaper than the precision ball screw line made through grinding.
· Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 417.60 € Consegna da ： 24 giorni *Prezzo unitario in configurazione base
-
Chiocciole per viti a ricircolo di sfere / dado di bloccaggio / diametro 14 - 45 / passo 4 - 12 / BNT
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 231.70 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Dadi a sfera / dado tondo / CNF
THK
A no preloading type rolling ball screw with a single unit CNF shape nut.
[Features]
· Due to the large lead, this unit can be combined with long nuts in four types of load conditions, and has a long life.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 547.50 € Consegna da ： 75 giorni *Prezzo unitario in configurazione base
-
Mandrini a sfera / diametro 10 - 50 / diametro 4 - 100 / A, C7, C8, C10 / TS
THK
[Features]
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.Configura oraA partire da∗ ： 115.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 10 / passo 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 676.60 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 14 / passo 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 737.40 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 15 / passo 10 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 1,050.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 15 / passo 20 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 1,170.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 20 / passo 10 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 918.30 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 20 / passo 20 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 1,288.80 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 8 / passo 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 843.60 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 12 / passo 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 930.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 12 / passo 5 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
· BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 612.20 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 14 / passo 4 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 674.80 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 14 / passo 8 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 1,007.00 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 16 / passo 16 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
· BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 1,231.40 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia rettangolare / diametro 25 / passo 20 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 1,843.60 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Supporti per viti a ricircolo di sfere / per viti BNK / acciaio / , alluminio / rivestimento selezionabile / MC
THK
- Sconto volumi elevati
- Dati CAD disponibili in formato 2D
Configura oraA partire da∗ ： 130.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Configura ora
A partire da∗ ： 345.40 € Consegna da ： 9 giorni *Prezzo unitario in configurazione base
-
Viti a ricircolo di sfere / flangia compatta / diametro 8 - 32 / Passo 2 - 32 / C10 / HRC 58 / MV
MORIMOTO_SHAFT
Generally speaking, ball screws have a dramatically higher transmission efficiency than slide screws. We have blanks in abundant variations, and can provide quick delivery thanks to our proprietary machining technology.- Dati CAD disponibili in formato 2D
Configura oraConsegna da ： 8 giorni -
Viti a ricircolo di sfere / flangia compatta / diametro 8 - 32 / passo 2 - 32 / C10 / MY
MORIMOTO_SHAFT
Generally speaking, ball screws have a dramatically higher transmission efficiency than slide screws. We have blanks in abundant variations, and can provide quick delivery thanks to our proprietary machining technology.- Dati CAD disponibili in formato 2D
Configura oraConsegna da ： 8 giorni -
Viti a ricircolo di sfere in miniatura, rettificate con dado flangiato (24100)
NORELEM
· Mandrino di precisione in acciaio o acciaio inox
· Rettificato e temprato induttivamente
· Con estremità dell'albero finite
· Campi di utilizzo: ottica, industria alimentare, ingegneria biomedica, ingegneria di precisione
· Pronto al montaggioConfigura oraA partire da∗ ： 504.25 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
Microsistemi a ricircolo di sfere, rettificati con dado cilindrico avvitabile (24105)
NORELEM
· Mandrino di precisione in acciaio o acciaio inox
· Rettificato e temprato induttivamente
· Con estremità dell'albero finite
· Campi di utilizzo: ottica, industria alimentare, ingegneria biomedica, ingegneria di precisione
· Pronto al montaggioConfigura oraA partire da∗ ： 528.97 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Categorie dei prodotti |
| Profilo flangia |
| Grado di precisione |
| D.E. albero vite d(φ) |
| Piombo(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | NSK | MORIMOTO_SHAFT | MORIMOTO_SHAFT | NORELEM | NORELEM |
| Serie prodotto | Viti a ricircolo di sfere / flangia rettangolare / diametro 8 / passo 1 / C3, C5, C7 / BNK | Chiocciole per viti a ricircolo di sfere / dado compatto / BLK | Chiocciole per viti a ricircolo di sfere / dado compatto / diametro 10 - 50 / passo 4 - 16 / BTK | Chiocciole per viti a ricircolo di sfere / dado compatto / WTF | Mandrini a sfera / diametro 10 - 50 / diametro 4 - 100 / A, C7, C8, C10 / TS | Viti a ricircolo di sfere / flangia rettangolare / diametro 10 / passo 2 / C3, C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 14 / passo 2 / C3, C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 15 / passo 10 / C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 15 / passo 20 / C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 20 / passo 10 / C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 20 / passo 20 / C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 8 / passo 2 / C3, C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 12 / passo 2 / C3, C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 12 / passo 5 / C3, C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 14 / passo 4 / C3, C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 14 / passo 8 / C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 16 / passo 16 / C5, C7 / BNK | Viti a ricircolo di sfere / flangia rettangolare / diametro 25 / passo 20 / C5, C7 / BNK | Vite a ricircolo di sfere standard, compatta serie FA per trasporto, FSS | Viti a ricircolo di sfere / flangia compatta / diametro 8 - 32 / Passo 2 - 32 / C10 / HRC 58 / MV | Viti a ricircolo di sfere / flangia compatta / diametro 8 - 32 / passo 2 - 32 / C10 / MY | Viti a ricircolo di sfere in miniatura, rettificate con dado flangiato (24100) | Microsistemi a ricircolo di sfere, rettificati con dado cilindrico avvitabile (24105) | |||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| A partire da∗ | 657.50 € *Prezzo unitario in configurazione base | 381.90 € *Prezzo unitario in configurazione base | 185.90 € *Prezzo unitario in configurazione base | 417.60 € *Prezzo unitario in configurazione base | 231.70 € *Prezzo unitario in configurazione base Sconto volumi elevati | 547.50 € *Prezzo unitario in configurazione base | 115.50 € *Prezzo unitario in configurazione base | 676.60 € *Prezzo unitario in configurazione base | 737.40 € *Prezzo unitario in configurazione base | 1,050.50 € *Prezzo unitario in configurazione base | 1,170.50 € *Prezzo unitario in configurazione base | 918.30 € *Prezzo unitario in configurazione base | 1,288.80 € *Prezzo unitario in configurazione base | 843.60 € *Prezzo unitario in configurazione base | 930.50 € *Prezzo unitario in configurazione base | 612.20 € *Prezzo unitario in configurazione base | 674.80 € *Prezzo unitario in configurazione base | 1,007.00 € *Prezzo unitario in configurazione base | 1,231.40 € *Prezzo unitario in configurazione base | 1,843.60 € *Prezzo unitario in configurazione base | 130.50 € *Prezzo unitario in configurazione base Sconto volumi elevati | 345.40 € *Prezzo unitario in configurazione base | - | - | 504.25 € *Prezzo unitario in configurazione base | 528.97 € *Prezzo unitario in configurazione base |
| Consegna da | 6 giorni | 6 giorni | 6 giorni | 24 giorni | 6 giorni | 75 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 9 giorni | 8 giorni | 8 giorni | 4 giorni | 4 giorni |
| Categorie dei prodotti | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Parte abbinata alla vite a ricircolo di sfere | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione |
| Profilo flangia | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Supporto | Profilo tondo | - | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Rettangolare | Rettangolare | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Rettangolare | Rettangolare | - | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | - | - |
| Grado di precisione | C5 / C7 | - | - | - | - | - | - | C3 / C5 | C3 / C5 / C7 | C5 | C5 | C5 / C7 | C5 | C3 / C5 | C3 / C5 | C3 / C7 | C3 / C5 | C5 | C5 | C5 / C7 | - | C7 | C10 | C10 | - | - |
| D.E. albero vite d(φ) | 8 | 15 ～ 50 | 10 ～ 50 | 15 ～ 50 | 14 ～ 45 | 15 ～ 30 | 14 ～ 32 | 10 | 14 | 15 | 15 | 20 | 20 | 8 | 12 | 12 | 14 | 14 | 16 | 25 | - | 12 ～ 25 | 8 ～ 32 | 8 | - | - |
| Piombo(mm) | 1 | 10 ～ 50 | 4 ～ 16 | 20 ～ 100 | 4 ～ 12 | 30 ～ 60 | 4 ～ 25 | 4 | 2 | 10 | 20 | 10 | 20 | 2 | 2 | 5 | 4 | 8 | 16 | 20 | - | 10 ～ 25 | 2 ～ 32 | 2 | - | - |
Loading...
Seleziona per:
Stock
-
- Indicare solo prodotti a magazzino
-
Categorie dei prodotti
-
Profilo flangia
-
Grado di precisione
-
D.E. albero vite d(φ)
-
Piombo(mm)
Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Viti a ricircolo di sfere
-
- Alberi lineari
- Supporti per alberi
- Anello di bloccaggio
- Boccole lineari
- Guide a sfere
- Alberi scanalati
- Boccole e rondelle autolubrificanti
- Piastre e guide autolubrificanti
- Guide lineari
- Catene portacavi
- Viti a ricircolo di sfere
- Unità di supporto
- Viti di trasmissione, viti a strisciamento
- A rulli incrociati
- Gruppi di scorrimento, guide a V, guide lineari
- Attuatori
- Rulli per movimentazione lineare
- Soffietti
-
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.