TIGERS POLYMER Flessibili per condotti
?* Informazioni su tempi di consegna e prezzi
-
Tubo flessibile Ti-duct Modello GL
TIGERS POLYMER
Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
[Features]
· Lightweight and portable.
· Highly flexible.
· Features superior chemical resistance against acids, alkali materials, etc.
· High transport capacity is achieved due to low airflow resistanceConsegna da ： 9 giorni -
Tubo flessibile Ti-duct Modello N
TIGERS POLYMER
Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
[Features]
· Lightweight and portable.
・It has high flexibility.
· It has superior chemical resistance properties for acids and alkaline etc.
・Metal wires in the core wires reduce heat deformationConsegna da ： 10 giorni -
Tubo flessibile Ti-duct Modello GL Resistente alle abrasioni
TIGERS POLYMER
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.Consegna da ： 10 giorni -
Tubo flessibile Ti-duct Modello GL impermeabile agli oli
TIGERS POLYMER
Uses a special oil-resistant material (soft part of the hose) that is not hardened by lubricating oil, cutting oil, etc. Used for oil mist recovery on manufacturing machinery such as lathes and milling cutters.Consegna da ： 10 giorni -
Tubo flessibile Ti-duct Modello GL-E
TIGERS POLYMER
GL type tie duct antistatic hose that includes a grounding wire. Transparent, allowing transported materials to be confirmed. Indoor piping duct for clean rooms, etc.Consegna da ： 10 giorni -
Tubo flessibile Ti-duct Modello GL-ST
TIGERS POLYMER
A transparent antistatic type of tie duct hose. For indoor aerial transportation of soot, piping in clean rooms, etc.Consegna da ： 10 giorni -
Tubo Tiflex Modello P
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.A partire da∗ ： 96.70 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile Modello P-2
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.A partire da∗ ： 96.70 € Consegna da ： 9 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile con ritardante di fiamma Modello P
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also providedA partire da∗ ： 111.80 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile di tipo AP
TIGERS POLYMER
Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
[Features]
･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
· Flexible, lightweight with superior workability.
· The allowable continuous service temperature is 100˚C or lessA partire da∗ ： 115.00 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile Modello V Modello PAL
TIGERS POLYMER
Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
[Features]
Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
· The allowable continuous operating temperature is 130˚C or less.A partire da∗ ： 85.70 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile Modello V Modello AG
TIGERS POLYMER
Lightweight and with excellent flame and heat resistance. The material used for the product is a flameproof grade 1 material as stipulated in JIS A 1322. The continuous operating temperature is up to 180°C.
[Features]
· Heat resistant flexible hose made of specially laminated aluminum foil, glass cloth, and galvanized steel plate.
· Lightweight and with excellent flame and heat resistance.
· The continuous operating temperature is up to 180˚C.
· The aluminum and the glass cloth sheet are flameproof grade 1 materials as stipulated in JIS A1322.A partire da∗ ： 130.70 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile Modello V Modello FP
TIGERS POLYMER
The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
[Features]
· Made of special coating glass cloth and stainless steel plate (SUS304).
· Easy to stow, store and transport because it can be extended or retracted as and when required.
· The allowable continuous operating temperature is 250°C or less.
· Can be used at higher temperatures than PAL, AG types.
· The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.A partire da∗ ： 295.70 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Tubo flessibile Modello V Modello SUS
TIGERS POLYMER
Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.A partire da∗ ： 133.60 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
Consegna da ： 10 giorni
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Materiale |
| Uso servizio taglio |
| Proprietà |
| D.I. d(mm) |
| D.E. D(mm) |
| Colore |
| Liquido applicabile |
| Pressione massima ammessa (inferiore alla temperatura ambiente)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Serie prodotto | Tubo flessibile Ti-duct Modello GL Resistente alle abrasioni | ||||||||||||||
| A partire da∗ | - | - | - | - | - | - | 96.70 € *Prezzo unitario in configurazione base | 96.70 € *Prezzo unitario in configurazione base | 111.80 € *Prezzo unitario in configurazione base | 115.00 € *Prezzo unitario in configurazione base | 85.70 € *Prezzo unitario in configurazione base | 130.70 € *Prezzo unitario in configurazione base | 295.70 € *Prezzo unitario in configurazione base | 133.60 € *Prezzo unitario in configurazione base | - |
| Consegna da ： | 9 giorni | 10 giorni | 10 giorni | 10 giorni | 10 giorni | 10 giorni | 6 giorni | 9 giorni | 10 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 10 giorni | 10 giorni |
| Materiale | PVC | PVC | EPDM | PVC | PVC | PVC | Resina olefinica | Resina olefinica | Resina olefinica | Alluminio | Alluminio | Alluminio | Vetro di rivestimento speciale | Acciaio inox | Elastomero |
| Uso servizio taglio | Sì | Sì | Sì | Sì | Sì | Sì | No | No | No | No | No | No | No | No | Sì |
| Proprietà | Standard / Flessibilità | Standard / Flessibilità | Resistenza all'abrasione / Termoresistenza | Resistenza agli oli / Flessibilità | Prestazioni antistatiche | Prestazioni antistatiche / Flessibilità | Standard / Flessibilità / Altro | Standard / Flessibilità / Altro | Standard / Proprietà ignifughe / Altro | Termoresistenza / Flessibilità | Termoresistenza / Altro | Termoresistenza | Termoresistenza / Altro | Termoresistenza | Flessibilità |
| D.I. d(mm) | 25 ～ 303 | 16.7 ～ 204.1 | 38.1 ～ 208 | 38.1 ～ 202 | 50.8 ～ 152.4 | 25 ～ 152.4 | 37.5 ～ 302 | 37.5 ～ 127.5 | 37.5 ～ 127.5 | 38.1 ～ 101.6 | 50.8 ～ 126 | 50.8 ～ 126 | 50.8 ～ 126 | 50.8 ～ 126 | 32 ～ 101.6 |
| D.E. D(mm) | 32.4 ～ 316.4 | 21.2 ～ 211.5 | 46 ～ 223 | 45.9 ～ 215 | 59.9 ～ 168.8 | 32.4 ～ 163.8 | 41.5 ～ 308 | 41.5 ～ 131.5 | 41.5 ～ 131.5 | 42.9 ～ 110 | 54.3 ～ 130 | 55.3 ～ 131 | 55.3 ～ 131 | 53.8 ～ 129.5 | 39.5 ～ 110.8 |
| Colore | Grigio | Grigio | Nero | Avorio | Trasparente | Trasparente | Marrone scuro | Bianco | Nero | Grigio | Grigio | Bianco | Grigio | Grigio | Bianco |
| Liquido applicabile | Sostanze chimiche / Polvere / Aria | Sostanze chimiche / Polvere / Aria | Polvere / Granelle / Aria / Frammenti di carta | Olio per macchinari / Lubrificante / Nebbia d'olio | Polvere | Polvere | Aria | Aria | Aria | Aria | Aria | Aria | Aria | Aria | Polvere / Aria |
| Pressione massima ammessa (inferiore alla temperatura ambiente)(MPa) | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.01 ～ 0.05 | 0.01 ～ 0.06 | 0.02 ～ 0.05 | 0.02 ～ 0.06 | 0.002 ～ 0.018 | 0.005 ～ 0.018 | 0.005 ～ 0.018 | 0.03 ～ 0.06 | 0.018 ～ 0.032 | 0.018 ～ 0.032 | 0.01 ～ 0.018 | 0.01 ～ 0.018 | 0.03 ～ 0.06 |
Loading...
Seleziona per:
Limitare la ricerca specificando Spec./Dim.
-
Materiale
- Alluminio
- Vetro di rivestimento speciale
- Acciaio inox
- Polipropilene
- PVC
- Resina olefinica
- EPDM
- Elastomero
- Acciaio
-
Uso servizio taglio
- Sì
- No
-
Proprietà
- Standard
- Prestazioni antistatiche
- Resistenza all'abrasione
- Resistenza agli oli
- Proprietà ignifughe
- Bassa temperatura Resistenza
- Termoresistenza
- A bassa produzione di particolato
- Flessibilità
- Altro
-
D.I. d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 39
- 41
- 50
- 50.6
- 50.8
- 50.9
- 51
- 52.5
- 53.0
- 53.5
- 62.4
- 63
- 63.5
- 64
- 65.5
- 66.2
- 67
- 67.5
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 113
- 114.3
- 123.0
- 125
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 165
- 175
- 176.5
- 176.6
- 177.8
- 196.0
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 250
- 252
- 252.1
- 253
- 254
- 278
- 294.0
- 300
- 302
- 303
- 303.5
- 359.0
- 400
- 410.0
- 500
- 512.0
-
D.E. D(mm)
- 21.2
- 24
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 45.0
- 45.4
- 45.9
- 46
- 46.2
- 46.8
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.9
- 60.2
- 61.0
- 61.2
- 61.8
- 69
- 69.5
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.8
- 72
- 72.6
- 73.0
- 73.2
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87.2
- 87.6
- 94
- 94.5
- 95
- 96
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.5
- 112
- 112.2
- 113.0
- 114.6
- 119.3
- 125.9
- 129.5
- 130
- 130.3
- 131
- 131.5
- 132
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 140.2
- 155
- 155.5
- 155.7
- 157
- 158
- 160
- 162
- 163.8
- 164
- 164.8
- 166.0
- 166.2
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 205
- 205.7
- 208
- 209.5
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 223
- 240.4
- 243.1
- 255.9
- 256
- 261.0
- 263.9
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 292.6
- 305.9
- 306.5
- 308
- 309.5
- 311
- 316.0
- 316.4
- 318
- 322
- 328.2
- 378.5
- 418.0
- 431.0
- 520.0
- 532.0
-
Colore
- Nero
- Bianco
- Grigio
- Trasparente
- Avorio
- Marrone scuro
- Colore metallico
-
Liquido applicabile
-
Pressione massima ammessa (inferiore alla temperatura ambiente)(MPa)
Limitare la ricerca specificando il produttore
-
- MISUMI (7)
- TOTAKU INDUSTRIES (17)
- TIGERS POLYMER (15)
- KURIMOTO (5)
- KURARAYPLASTICS (4)
- KANAFLEX CORPORATION (2)
- COSMOTEC (1)
- OHTSUKA (1)
- ORIENT CORPORATION (1)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Flessibili per condotti
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.