SURUGA SEIKI Supporti specchio

?* Informazioni su tempi di consegna e prezzi

• 

  Sostegni per vetro Gimbaled

  SURUGA SEIKI

  A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.
  
  [Features]
  ■ F50, F55
  · Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.
  · Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening the clamp, allows for coarse movement (adjustment) over 360°.
  · A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
  · The included standard rod is ø 20, and has a length of 60 mm. However the rod length can be changed. The holder's screw holes are M6P = 1. A40 to A42 rods can be used.
  · Mirror Holder F50: For the feeding method, A-type micrometer heads and an E-type screw system are available.
  · Horizontally operated type mirror holder F55: Due to the unique horizontal operation method (the operation system is installed in a horizontal direction), the user can operate it without going in front of the optical axis with their hands. A proximity specification is also available.
  ■ F52
  · A holder for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted in the two axial directions.
  · The tilt (θy, θz) of the two axes can be finely adjusted by ±2° or ±3° (F52).
  · A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
  · Items such as mirrors are attached and removed using a threaded ring. Includes a resin protective ring.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	220.20 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per orientamento dell'asta

  SURUGA SEIKI

  [Features]
  · Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.
  · The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.
  · Adhesive fixing and three-point support fixing types are available for the mirror.
  · The lower side of the pole is an M16P (= 1 mm) male screw.
  · Can be fixed to magnetic bases and plates, etc.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	314.20 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio

  SURUGA SEIKI

  An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	130.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio (Morsetto a striscia)

  SURUGA SEIKI

  A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	158.90 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio (Asse ottico: 25 mm)

  SURUGA SEIKI

  A mirror holder with an optical axis height of 25 mm. For use with the Opt Station. Select the most appropriate mounting method so that the held element does not distort when mounted. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	119.10 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio Manovrabili da sopra

  SURUGA SEIKI

  A top operated mirror holder with excellent stability and operability. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	238.40 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio Modello compatto (Con chiusura)

  SURUGA SEIKI

  [Features]
  · A holder for holding small mirrors up to ø30 mm. The tilt (θy, θz) can be adjusted in the two axes.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type (F58N-30-2), mirrors from ø20 to 30 mm can be held by changing the position of the lower supporting pin.
  · The fine tilt-adjustment knob is P = 0.5 mm and can be fixed to a set incline with a lock nut.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	119.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per vetro Modello compatto Manovrabili da sopra

  SURUGA SEIKI

  [Features]
  · A small top operated mirror holder with excellent stability and operability.
  · Can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
  · The tilt axis can be locked using the included lock nut.
  · The mirror can be fixed using either adhesive or via the three-point support method.
  · Types with a rod and types without a rod are available.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	158.90 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio Modello compatto e a movimento preciso

  SURUGA SEIKI

  A holder that can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
  
  [Features]
  · The fine-movement resolution is 0.7°/rotation, two times that of F58N.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · Both the adhesive and screw types are available with or without a rod.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	119.10 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Movimento fine e sostegni per specchio compatti (con blocco)

  SURUGA SEIKI

  [Features]
  · The FM58 with an added tilt-lock nut.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · Both the adhesive and screw types are available with or without a rod.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	119.50 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegno per specchio rettangolare

  SURUGA SEIKI

  [Features]
  · A holder for fixing square mirrors, filters, and projection plates, etc.
  · Fix by tightening the two screws.
  · The holder is for fixing purposes only.
  · The holder is available with a width of 60 mm or 100 mm.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	71.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegno ad alta stabilitá per specchio

  SURUGA SEIKI

  A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	158.90 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegni per specchio ad alte prestazioni (Asse ottico: 25 mm)

  SURUGA SEIKI

  [Features]
  · A compact version of the FM532.
  · Designed with an optical axis height of 25 mm. For use with the Opt Station.
  · A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	129.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

Loading...