NACHI(FUJIKOSHI) Punte al carburo
Eseguire la ricerca specificando la categoria di classe più bassa
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
- Raccomandazione
Punta Aqua Drill EX Flat AQDEXZ
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.A partire da∗ ： 91.50 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill 3 taglienti AQD3F
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.A partire da∗ ： 119.20 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX con foro per olio 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.A partire da∗ ： 129.20 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta standard Aqua Drill Regular AQDR
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.- Sconto volumi elevati
A partire da∗ ： 118.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill 3 tagli AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.A partire da∗ ： 155.50 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Punta standard Aqua Drill EX Regular AQDEXR
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.A partire da∗ ： 112.10 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill FC AQDFC
NACHI(FUJIKOSHI)
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.A partire da∗ ： 113.80 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta dura Aqua Drill Hard AQDH
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.A partire da∗ ： 38.30 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
- In Offerta fino al 30/06/2026
Micropunta Aqua Micro Drill AQMD
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.- Sconto volumi elevati
A partire da∗ ： 27.10 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Punta corta Aqua Drill EX Stub AQDEXS
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.- Sconto volumi elevati
A partire da∗ ： 94.80 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta standard DLC Regular DLCDR
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.A partire da∗ ： 100.80 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Micropunte DLC, DLCMD
NACHI(FUJIKOSHI)
An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.A partire da∗ ： 63.40 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX con foro per olio 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.A partire da∗ ： 147.40 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX con foro per olio 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.A partire da∗ ： 186.20 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta corta Aqua Drill Stub AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.A partire da∗ ： 100.70 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX Flat standard AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
· Flat drill for 4D boring depth with excellent drilling performance.
· A centering hole or guide hole is required.
[Applications]
· Countersinking on inclined surfaces and correction of eccentric bores.
· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.A partire da∗ ： 118.40 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX. semi lunga AQDEXSL
NACHI(FUJIKOSHI)
A drill capable of consistent, high-performance drilling of deep holes in anything from raw materials through to high hardness steel.A partire da∗ ： 131.10 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta AQDEXZOH3D Aqua Drill EX Flat, con foro per olio, 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.A partire da∗ ： 158.50 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX Flat, gambo lungo AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.A partire da∗ ： 137.60 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX con foro per olio, a 3 tagli, 3D AQDEXOH3F3D
NACHI(FUJIKOSHI)
[Features]
· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.
· Capable of highly-efficient hole drilling up to 3 times the drill diameter.A partire da∗ ： 176.20 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta Aqua Drill EX a 3 tagli AQDEX3FR
NACHI(FUJIKOSHI)
[Features]
· Uses 3-flute cutting edge with excellent cutting balance.
· Realizes high precision hole processing that is even possible without a reamer.A partire da∗ ： 141.30 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Punta a centrare Aqua Drill EX Starting AQDEXST
NACHI(FUJIKOSHI)
[Features]
· Highly accurate positioning is possible with good bite.
· A multi-function type capable of centering, chamfering and V-grooving.A partire da∗ ： 105.70 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Punta diamantata DCD
NACHI(FUJIKOSHI)
[Features]
· Ideal for long life machining of aluminum alloy, high-silicon aluminum, and high molecular weight materials (CFRP, GFRP).A partire da∗ ： 157.90 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Serie prodotto | Punta Aqua Drill EX con foro per olio, a 3 tagli, 3D AQDEXOH3F3D | ||||||||||||||||||||||
| A partire da∗ | 91.50 € *Prezzo unitario in configurazione base | 119.20 € *Prezzo unitario in configurazione base | 129.20 € *Prezzo unitario in configurazione base | 118.50 € *Prezzo unitario in configurazione base | 155.50 € *Prezzo unitario in configurazione base | 112.10 € *Prezzo unitario in configurazione base | 113.80 € *Prezzo unitario in configurazione base | 38.30 € *Prezzo unitario in configurazione base | 27.10 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta fino al 30/06/2026Sconto volumi elevati | 94.80 € *Prezzo unitario in configurazione base | 100.80 € *Prezzo unitario in configurazione base | 63.40 € *Prezzo unitario in configurazione base | 147.40 € *Prezzo unitario in configurazione base | 186.20 € *Prezzo unitario in configurazione base | 100.70 € *Prezzo unitario in configurazione base | 118.40 € *Prezzo unitario in configurazione base | 131.10 € *Prezzo unitario in configurazione base | 158.50 € *Prezzo unitario in configurazione base | 137.60 € *Prezzo unitario in configurazione base | 176.20 € *Prezzo unitario in configurazione base | 141.30 € *Prezzo unitario in configurazione base | 105.70 € *Prezzo unitario in configurazione base | 157.90 € *Prezzo unitario in configurazione base |
| Consegna da ： | 5 giorni | 5 giorni | 6 giorni | 6 giorni | 7 giorni | 6 giorni | 6 giorni | 6 giorni | Stesso giorno | 6 giorni | 5 giorni | 10 giorni | 6 giorni | 6 giorni | 6 giorni | 5 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 5 giorni | 6 giorni |
| Hole diameter (drill diameter) D(mm) | 0.5 ～ 15.8 | 4.21 ～ 12.55 | 2.5 ～ 8.7 | 4.1 ～ 10 | 6 | 2.9 ～ 15 | 2.1 ～ 11.9 | 2 ～ 9.9 | 0.21 ～ 1.47 | 2.1 ～ 13 | 4 ～ 9.5 | 1.3 | 7 | 5.6 | 12.5 | 3.6 ～ 10.5 | 2 | 6.5 | 3.7 ～ 7.9 | 6.3 | 3 | 4 | 4.05 |
| Groove Length L(mm) | 1.65 ～ 72 | 22 ～ 51 | 20 ～ 72 | 27 ～ 60 | 28 | 19 ～ 91 | 15 ～ 73 | 12 ～ 43 | 2.5 ～ 15 | 10 ～ 49 | 27 ～ 58 | 15 | 35 | 66 | 51 | 23 ～ 67 | 24 | 30 | 18 ～ 36 | 32 | 19 | 12 | 30 |
| work material | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[◎] / Alluminio[○] / Rame[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Ghisa[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Titanio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[◎] / Ghisa[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[◎] / Ghisa[◎] | Acciaio ad alta durezza[◎] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Ghisa[○] / Titanio[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Alluminio[◎] / Rame[○] | Alluminio[◎] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Ghisa[◎] / Titanio[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Ghisa[◎] / Titanio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[◎] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[◎] / Alluminio[○] / Rame[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Alluminio[○] / Rame[○] |
| Tool Material Type | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo | Carburo |
| Overall Length L(mm) | 47 ～ 115 | 66 ～ 110 | 68 ～ 127 | 71 ～ 110 | 72 | 49 ～ 153 | 47 ～ 130 | 44 ～ 93 | 38 ～ 47 | 45 ～ 100 | 59 ～ 108 | 47 | 88 | 118 | 110 | 60 ～ 110 | 56 | 88 | 100 ～ 120 | 88 | 49 | 52 | 65 |
| Shank Type | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto | Punta a gambo dritto / A gambo dritto | A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto | A gambo dritto | Punta a gambo dritto | Punta a gambo dritto | - | Punta a gambo dritto | Punta a gambo dritto | Punta a gambo dritto | A gambo dritto | A gambo dritto | A gambo dritto | A gambo dritto |
| Coating Y/N | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile |
| Coating Type | Altro | Altro | Altro | Altro | Altro | Altro | Altro | Altro | Altro | Altro | DLC | DLC | Altro | Altro | Altro | Altro | Altro | Altro | Altro | Per acciai generici | Per acciai generici | Per acciai generici | Rivestimento DIA |
| With/without Oil Hole | N/A | N/A | Disponibile | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | Disponibile | Disponibile | N/A | - | N/A | Disponibile | N/A | Disponibile | N/A | N/A | N/A |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.95
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.375
- 6.4
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
-
7～7.98
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.14
- 7.2
- 7.3
- 7.36
- 7.38
- 7.4
- 7.5
- 7.52
- 7.54
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
- 7.95
- 7.98
-
8～8.9
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.2
- 8.3
- 8.33
- 8.4
- 8.5
- 8.58
- 8.6
- 8.7
- 8.73
- 8.8
- 8.9
-
9～9.97
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.13
- 9.2
- 9.24
- 9.25
- 9.26
- 9.3
- 9.36
- 9.38
- 9.4
- 9.5
- 9.52
- 9.54
- 9.55
- 9.6
- 9.7
- 9.8
- 9.9
- 9.92
- 9.95
- 9.97
-
10～10.9
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.2
- 10.3
- 10.32
- 10.4
- 10.5
- 10.6
- 10.7
- 10.72
- 10.8
- 10.9
-
11～11.95
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.2
- 11.22
- 11.24
- 11.3
- 11.36
- 11.38
- 11.4
- 11.5
- 11.51
- 11.56
- 11.6
- 11.7
- 11.8
- 11.9
- 11.91
- 11.95
-
12～12.9
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.55
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.49
- 13.5
- 13.6
- 13.7
- 13.8
- 13.89
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.5
- 16.67
- 16.9
-
17～17.7
- 17
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
-
18～18.9
- 18
- 18.5
- 18.9
-
19～19.5
- 19
- 19.05
- 19.3
- 19.5
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
55
-
60
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.8
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.5
- 10.8
-
11～11.7
- 11
- 11.1
- 11.3
- 11.4
- 11.7
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.4
- 32
- 32.3
- 32.4
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
99
-
100
-
101
-
102
-
105
-
106
-
108
-
110
-
111
-
114
-
115
-
116
-
117
-
118
-
120
-
125
-
127
-
130
-
133
-
136
-
140
-
143
-
145
-
150
-
152
-
153
-
155
-
156
-
159
-
160
-
162
-
165
-
168
-
170
-
171
-
175
-
176
-
177
-
180
-
182
-
183
-
185
-
190
-
195
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
218
-
220
-
222
-
223
-
227
-
230
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
265
-
272
-
274
-
277
-
280
-
282
-
292
-
295
-
300
-
302
-
310
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
-
Tool Material Type
-
Overall Length L(mm)
-
Shank Type
-
Punta a gambo dritto
-
A gambo dritto
-
Punta gambo conico
-
Punta a gambo dritto
-
Coating Y/N
-
Coating Type
-
With/without Oil Hole
Limitare la ricerca specificando il produttore
-
- MISUMI (35)
- GUHRING (72)
- OSG (29)
- NACHI(FUJIKOSHI) (23)
- ATOM (20)
- IWATA TOOL (10)
- NS TOOL (9)
- DIJET (6)
- KYOWA SEIKO (5)
- 7 LEADERS (4)
- FUKUDA (4)
- SANDVIK (4)
- WIDIN (4)
- OKAZAKI SEIKO (3)
- UNION TOOL (3)
- DIXI (2)
- OMIKOGYO (2)
- EIKOSHA (1)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Punte al carburo
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.