MIRAI INDUSTRY Opzioni per tubi in resina

?* Informazioni su tempi di consegna e prezzi

• 

  Connettore N. 2【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  No. 2 connector used for rigid PVC wire tube (J-tube).
  
  [Features]
  1416 S type can also be mounted to a 16 knock hole (φ22 mm), knock diameter (φ22 mm φ27 mm).
  Compact type for combined use.

  • Sconto volumi elevati

  A partire da∗ ：	1.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto per tubo CD (tipo G)【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  Couplings (G-type) for CD/PF pipe-to-pipe connections.
  
  [Features]
  · Used in pipe-to-pipe connections.
  · Connection and release are both possible with just one touch. Slim straight type.

  A partire da∗ ：	1.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per tubo CD (tipo G)【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  This is a CD tube connector. Can instantly perform connection and unlocking. Cap attachment prevents intrusion of non-solidified concrete.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · Attached cap prevents intrusion of unsolidified concrete.

  A partire da∗ ：	1.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore curvo per l'uso con tubi CD (45°)

  MIRAI INDUSTRY

  [Features]
  · Convenient for piping, etc., to avoid laterally knocking the pipes and reinforcing bars if the box is positioned low down. Connect/unlock in one go.

  A partire da∗ ：	3.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Adattatore CP (per l'uso con tubi CD)

  MIRAI INDUSTRY

  [Features]
  ·For CD pipes and thin steel electrical conduits (with screws or without screws).
  · CP adapters (G type) used in a mutually connected manner.

  A partire da∗ ：	3.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Adattatore CP (per l'uso con tubi PF)

  MIRAI INDUSTRY

  [Features]
  ·For PF pipes and thin steel electrical conduits (with screws or without screws).
  · CP adapters (G type) used in a mutually connected manner.

  A partire da∗ ：	3.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Estremità F (uso con tubi PF con vite) G

  MIRAI INDUSTRY

  [Features]
  · For use with VVF cable false ceiling connections where sensors, etc. are mounted.
  · Four colors.
  · Useful for identifying complex wiring arrangements, etc. (Size 36 excluded). Can be fixed using a single screw.
  · Equipped with seal for preventing intrusion of unset cement.

  A partire da∗ ：	2.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Adattatore GP (per l'uso con tubi PF senza filettatura) tipo G

  MIRAI INDUSTRY

  [Features]
  · CD pipe, PF pipe, and thick steel conduit pipe (non-threaded).
  · Used in a mutually connected manner.
  · Used for PF pipes and thick steel conduit pipe (without screws).
  · This GP adapter (G-type) provides mutual connections.

  A partire da∗ ：	4.20 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto per tubo PF (tipo G)【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  [Features]
  - Coupling (G type) used for connecting PF pipes together.

  A partire da∗ ：	1.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per tubo PF (tipo G)【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  This is a PF tube connector (JIS C8412/G type). The color of this product is beige.
  
  [Features]
  · Connection and release are both possible with just one touch. A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  A partire da∗ ：	4.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per tubo PF (tipo G) grigio【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  This is a PF tube connector (JIS C8412/G type). The color of this product is gray.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  A partire da∗ ：	1.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per tubo PF (tipo G) bianco latte

  MIRAI INDUSTRY

  This is a PF tube connector (JIS C8412/G type). The color of this product is milky white.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  A partire da∗ ：	1.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per tubo PF (tipo G) impermeabile【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  This is a PF tube connector (waterproof/exclusively for Miraflex SS/G type). The color of this product is gray.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  A partire da∗ ：	2.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Semisella in acciaio inox per tubo PF (raccordo di montaggio)

  MIRAI INDUSTRY

  [Features]
  Used to anchor PF tubes and the like onto roof tiles.
  This is optimal for locations that are difficult to anchor with nails because this type is anchored with adhesive.

  A partire da∗ ：	3.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sella a un solo lato per tubo PF【1-50 Pezzi per confezione】

  MIRAI INDUSTRY

  [Features]
  ・When you use PF pipe in an exposed piping format, this single-sided saddle can be used for fixing it in place.
  ・Can be firmly fixed in place with a single screw.
  ・Includes a screw hole for fixing the unit in place temporarily.

  A partire da∗ ：	1.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore curvo (45°) per tubo PF

  MIRAI INDUSTRY

  [Features]Bent connector for PF tube (45° JIS C8412·G).
  · Convenient for wiring, etc. that avoids wiring or rebar in horizontal knockouts when the position of the box is low.
  · Connection and release are both possible with just one touch.

  A partire da∗ ：	3.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Doppia sella per tubi PF (per l'uso con Mira-Flex SS)【1-50 Pezzi per confezione】

  MIRAI INDUSTRY

  Saddle clamp (with rib) for PF tubing.
  
  [Features]
  · The protrusion on the inside of the saddle clamp bites into the tubing recess. This secures the tube firmly in place and prevents it from shifting.

  A partire da∗ ：	0.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto TS (dritto)【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  [Features]
  This is a TS coupling (straight type JISC8432) unit for use with rigid vinyl electrical conduits.

  A partire da∗ ：	1.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Semisella VE【1-50 Pezzi per confezione】

  MIRAI INDUSTRY

  [Features]Rigid PVC wire tube (J-tube) · TL tube for half saddle use.
  · Can be firmly attached with a single screw.
  · Can also be used as a saddle end stop.
  · Nylon type suitable for internal machinery use.

  A partire da∗ ：	1.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Doppia sella VE (tubo VE-tubo TL)【1-50 Pezzi per confezione】

  MIRAI INDUSTRY

  [Features]
  Rigid PVC wire tube (J-tube).
  Both saddles used for the TL-tube.

  • Sconto volumi elevati

  A partire da∗ ：	1.10 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Copertura terminale (tipo standard per l'uso con tubi CD)

  MIRAI INDUSTRY

  [Features]
  ·This is an end cover for CD pipes (G-type) that can be used for operations such as pulling cable into two-layer ceilings.
  · Connection and release are both possible with just one touch.

  A partire da∗ ：	2.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Copertura terminale (tipo standard per l'uso con tubi PF)

  MIRAI INDUSTRY

  [Features]
  ·This is an end cover for PF pipes (G-type) that can be used for operations such as pulling cable into two-layer ceilings.
  · Connection and release are both possible with just one touch.

  A partire da∗ ：	2.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Copertura terminale 45 (per l'uso con tubi PF, tipo a 45° )

  MIRAI INDUSTRY

  [Features]
  · PF tube end cover use for wall-side installations etc. (45° · G type).
  · Product intermediate between an end cover (standard type) and a temporary frame bushing.
  · Connection and release are both possible with just one touch.

  A partire da∗ ：	2.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Tappo entrata

  MIRAI INDUSTRY

  [Features]
  Entrance cap for rigid PVC wire tube use (J-tube) (JISC8432).

  A partire da∗ ：	5.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Tappo entrata (separato)

  MIRAI INDUSTRY

  [Features]
  · A split outlet type for easy wiring.
  · Entrance cap (separate JIS C8432) for rigid PVC wire conduit (J Tube).

  A partire da∗ ：	6.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto combinato (tubo corrugato monostrato CD ⇔ tubo VE)

  MIRAI INDUSTRY

  [Features]
  Combination coupling between single-layer CD corrugated tube and VE tube.

  A partire da∗ ：	1.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto combinato (tubo PF ⇔ tubo VE)

  MIRAI INDUSTRY

  [Features]
  Combination coupling between PF tube and VE tube.

  A partire da∗ ：	1.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Tappo per tubo (tappo, per l'uso con tubi CD)

  MIRAI INDUSTRY

  This end cap is used to prevent leaks, as well as waste and other foreign materials from entering CD pipes, as well as to protect the pipe ends.
  
  [Features]
  · Used to prevent foreign matter such as grease and dirt from entering the CD pipe and PF pipe, and to protect the terminals.

  A partire da∗ ：	2.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Nuova estremità F Koro (montaggio a vite, per l'uso con tubi CD, rivestimento incluso)

  MIRAI INDUSTRY

  With just a single nail, CD pipes can be anchored in place. This is an end cover (screw nails included) for use with VVF rolling wiring.
  
  [Features]
  · Can be secured simply by simply hammering in a single nail.
  ·The compact size makes construction a breeze even in confined spaces.
  · Includes a seal for preventing leakage.

  A partire da∗ ：	2.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordo curvo

  MIRAI INDUSTRY

  [Features]
  Normal bend for rigid PVC wire tube (J-tube) (JISC8432).

  A partire da∗ ：	2.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Fascetta palo【1-10 Pezzi per confezione】

  MIRAI INDUSTRY

  Durable stainless steel band.
  
  [Features]
  • Can be easily mounted to a variety of instruments with wood screws, including meter plates, meter boxes, switch boxes, temporary switch boxes, wiring devices, and fluorescent lights.
  • Because this is a sturdy stainless steel band, it can be fixed firmly in place on poles and other surfaces.

  A partire da∗ ：	7.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Supporto per palo (per l'uso con fascette in acciaio inox)

  MIRAI INDUSTRY

  A pole mount for mounting stainless steel bands to steel poles or concrete posts .
  
  [Features]
  · A pole mount for mounting stainless steel bands to steel poles or concrete posts, etc.
  · Various types of box equipment can be easily mounted with wood screws.
  · No welding is required — a clamp and stay are included it can also be used for opening holes in steel tubes.
  · Can be connected directly to the extendable pole (MRD-63Y) (using the mounting fittings for the box included [except for POB-F and POB-1F]).

  A partire da∗ ：	6.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Fascetta palo per il fissaggio di morsetti in metallo【10 Pezzi per confezione】

  MIRAI INDUSTRY

  [Features]
  · Robust, ratchet type stainless steel band easily and securely fixable clamp, and firmly affixes to poles and pillars. (Band only, clamp sold separately.).
  · Band only comes in a convenient plastic case for storage.
  • The pole band protective cover insulates the pole band from the target, and prevents static electricity.

  A partire da∗ ：	36.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessori per condotti guida, copertura parete

  MIRAI INDUSTRY

  [Features]
  Wall duct use wall cover for use at points where cable exits from wall. (Combination indoor/outdoor use).

  A partire da∗ ：	6.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessori per condotti guida, copertura entrata

  MIRAI INDUSTRY

  [Features]
  Used in locations where cables are pulled in from drop ceilings.

  A partire da∗ ：	7.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio di giunzione angolare per condotti stampaggio

  MIRAI INDUSTRY

  [Features]
  · This corner joint is used as a cosmetic cover for molding ducts in corner areas where cables are pulled in, such as ceilings and walls (for both indoor and outdoor use).
  · The 60 model can also be connected to free joints (bellows).
  · The 60 model can be used for connection of molding ducts between 60 models and 100 models.

  A partire da∗ ：	8.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessori per condotti stampaggio, sella

  MIRAI INDUSTRY

  [Features]
  · Cable protector duct saddle used for duct crosscut reinforcements, deformation prevention, and concealing joined sections with cover.
  · Can be used for the intermediate part and connections of the free joint.

  A partire da∗ ：	3.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio terminale per condotti stampaggio

  MIRAI INDUSTRY

  This duct end is used for the ends of molding ducts (both outdoor and indoor use). Includes a knock unit for pulling out cables. Can be used for connecting VE pipes and PF pipes.
  
  [Features]
  · Used for the ends of ducts.
  ·Includes a knock unit for pulling out cables.
  ·Can be used for connecting VE pipes and PF pipes.

  A partire da∗ ：	2.90 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio curvo per condotti stampaggio

  MIRAI INDUSTRY

  This duct bend for molding ducts is used for corners and other bending positions (both indoor and outdoor use).
  
  [Features]
  · Used for corners and other bending positions.
  · Model 60 can also be connected to free joints (bellows).

  A partire da∗ ：	6.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessori per condotti guida; angolo per condotto

  MIRAI INDUSTRY

  Angled corner bracket used for guide ducts when connecting corner locations (combined indooroutdoor use).
  
  [Features]
  · For mutual connections.
  When cable is used to place a load on the cover, pan-head tapping screws can be used to anchor the cover.

  • Sconto volumi elevati

  A partire da∗ ：	6.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio angolare interno per condotti stampaggio

  MIRAI INDUSTRY

  [Features]
  · This is a duct inside corner for use with corner connections of molding ducts (both indoor and outdoor use).

  • Sconto volumi elevati

  A partire da∗ ：	6.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio a T per condotti stampaggio

  MIRAI INDUSTRY

  [Features]
  · These are tees for use with duct branches of molding ducts (both indoor and outdoor use).

  A partire da∗ ：	9.20 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio di giunzione libero per condotti stampaggio

  MIRAI INDUSTRY

  [Features]
  This is a free joint fitting for use with molding ducts that are flexible and compatible with uneven surfaces (both indoor and outdoor use). Can be anchored in place with a saddle.

  A partire da∗ ：	13.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessori per condotti guida, copertura scorrevole

  MIRAI INDUSTRY

  [Features]
  Use for cable sliding part.
  · Model 100 can also be connected to free joints (bellows).

  A partire da∗ ：	4.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accessorio di copertura estetica per condotti stampaggio

  MIRAI INDUSTRY

  [Features]
  This is a cosmetic cover for use with molding duct connections such as cosmetic covers for areas where walls and ceilings are penetrated, as well as pole boxes (both indoor and outdoor use). This product can also be used with free joints (bellows portions).

  A partire da∗ ：	3.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

Loading...