IKEUCHI Ugelli a spruzzo

?* Informazioni su tempi di consegna e prezzi

• • In Offerta fino al 30/06/2026

  

  Ugello a ventaglio integrato standard serie VVP metallo & resina

  IKEUCHI

  Produces a flat (dispersed) spray pattern with an uneven type flow rate that is most powerful in the center and weaker towards the edges.
  Overlap the two spray patterns with the different nozzle arrangements to even out the flow rate distribution across all sizes.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	4.50 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ugello integrato a ventaglio Serie VEP metallo & resina

  IKEUCHI

  Produces a flat (dispersed) spray with an even flow rate distribution across the entire range of spray pattern. The striking force is even per unit surface area.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	10.10 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ugello a ventaglio angolatura ampia Serie YYP metallo & resina

  IKEUCHI

  [Features]
  · Generates wide angle flat spray even at low fluid pressure.
  · Less clogging than other flat spray nozzles, although the spray impact is not as strong.
  ▪ Sprays at an angle of 75 degrees to the nozzle axis.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	9.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Ugello conico generatore di nebbia, modello iniettore minimo serie KB

  IKEUCHI

  Boasts the highest atomization performance of all single liquid nozzles. An ultra-small hollow-coned nozzle with a circular spray pattern. Produces a "fine mist." Everything from the spin chamber to the nozzle is made with ceramics, providing excellent abrasion resistance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	54.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Ugello con profilo getto a cono vuoto serie AAP, volume di iniezione medio

  IKEUCHI

  Produces a stable spray regardless of whether the liquid pressure is high or low. Produces a hollow cone type mist with a comparatively fine spray. There is only one inlet and outlet, which helps prevent clogging.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	34.60 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Ugello a spruzzo circolare pieno forma standard Serie JJXP

  IKEUCHI

  A fully-coned nozzle with a circular spray pattern and evenly-distributed flow rate. The spray capacity ranges from small to medium.
  The aperture for foreign objects to pass through has been made larger, helping prevent clogging. An X-shaped whirler is used for the rotating mechanism.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	10.30 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ugello a spruzzo circolare pieno angolo di apertura ampio Serie BBXP

  IKEUCHI

  [Features]
  · A wide angled conical nozzle with a circular shaped spray pattern and uniform flow rate distribution.
  · The spraying angle is 120° and is able to cover a wider spray surface area than other nozzles.
  · Available with low to medium-spray rates.
  · The aperture for foreign objects to pass through has been made larger, helping prevent clogging.
  · A X shaped whirler is used for the rotating mechanism.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	13.90 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ugello filettato piramidale Modello per liberare le ostruzioni Serie AJP Metallo & Resina

  IKEUCHI

  A fully-conical nozzle with a circular spray pattern and uniform flow distribution. A completely new concept for atomizing liquids through collision inflow without using a whirler. The passage aperture for allowing foreign objects to pass through is especially large.
  
  [Features]
  · A fully-conical nozzle with a circular spray pattern and uniform flow distribution.
  · A completely new concept for atomizing liquids through collision inflow without using a whirler.
  · Does not feature an integrated whirler. The flow inlet and spray outlet are both via a single hole, and the passage aperture for allowing foreign objects to pass through is especially large.
  · Sprays perpendicularly to the direction of the inflow.
  · A polyphenylene sulfide resin (PPS) injection molded product with excellent chemical and heat resistance is available for liquid chemical sprays, such as for hydrochloric acid, etc.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	10.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ugello a spruzzo circolare pieno Serie SSXP

  IKEUCHI

  A fully pyramid-shaped nozzle with a square spray pattern and even flow rate distribution. Features a wide angle mist spray head-on of 90° - 100°, letting you cover a wide surface area.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	18.70 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ugello dritto standard serie CCP

  IKEUCHI

  A completely straight flow with the most powerful striking force. The design of the internal sections, in which liquid resistance is minimized, ensures that it is able to withstand turbulence within the pipes and generate a significantly larger spray than other straight nozzles of the same aperture size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	14.60 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ugello ad iniezione liquido serie EJX metallo & resina

  IKEUCHI

  A submerged type stirrer spray nozzle for spraying underwater. It uses the resultant negative pressure to suck in the surrounding liquid and produce a spray three to four times that of the supplied volume. Features a simple structure and a small lightweight design.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	26.90 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Ugello per iniezione di piccoli volumi a miscela fine di 2 fluidi. Serie BIMV a ventola (modello pa pressurizzazione liquida)

  IKEUCHI

  [Features]
  · A two fluid flat spray nozzle that produces a "fine mist" with a mean particle size of 100 microns or less.
  · A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.
  · Features three spray angles: 110°, 80°, and 45°.
  · A flat shape with uniform distribution over the entire range. The one nozzle can produce a flat (dispersed) spray pattern with an uneven type flow rate that is most powerful in the center and weaker towards the edges.

  • Sconto volumi elevati

  A partire da∗ ：	157.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Iniettore piccolo con ugello per doppio fluido generatore di nebbia conico serie BIMK (modello liquido pressurizzato)

  IKEUCHI

  A two-liquid hollow coned nozzle that produce a "fine mist" with a mean particle size of 100 microns or less. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.

  • Sconto volumi elevati

  A partire da∗ ：	233.70 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• 

  Iniettore piccolo con ugello per doppio fluido generatore di nebbia conico serie BIMJ (modello liquido pressurizzato)

  IKEUCHI

  A fully coned nozzle that produces a "fine mist" with a mean particle size of 100 microns or less. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.

  • Sconto volumi elevati

  A partire da∗ ：	157.30 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• 

  Ugello a 2 fluidi a ventaglio vaporizzazione nebbia fine di 2 fluidi Serie BIMV (modello aspirazione)

  IKEUCHI

  A two-fluid flat spray nozzle that generates a "fine mist" with a mean particle size of 30 microns or less. A suction type that does not require a pressurizer for the liquid supply.

  • Sconto volumi elevati

  A partire da∗ ：	157.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sottile Generatore di nebbia con 2 piccoli ugelli fluidi a cono pieno per l'iniezione di piccoli volumi Serie BIMK (Modello ad aspirazione)

  IKEUCHI

  A two-liquid hollow coned nozzle that produce a "fine mist" with a mean particle size of 100 microns or less. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.

  • Sconto volumi elevati

  A partire da∗ ：	233.70 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• 

  Ugello a 2 fluidi a cono vaporizzazione nebbia fine di 2 fluidi Serie BIM-PP (modello liquidi pressurizzati)

  IKEUCHI

  A "fine mist" two-liquid nozzle made using polypropylene (PP) resin as the chief material for the main unit, providing excellent chemical resistance. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid.

  A partire da∗ ：	136.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ugello dritto standard Serie CP

  IKEUCHI

  A completely straight flow with the most powerful striking force. The design of the internal sections, in which liquid resistance is minimized, ensures that it is able to withstand turbulence within the pipes and generate a significantly larger spray than other straight nozzles of the same aperture size.

  • Sconto volumi elevati

  A partire da∗ ：	13.10 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Giunti universali - serie WUT

  IKEUCHI

  [Features]
  · Rotates 360°, allowing for adjustment of the angle.
  · With a lock function for retaining the angle (direction).
  · Features a rectification function than inhibits turbulence within the joints.
  · A high pressure design with a pressure resistance of 3 MPa.
  · A safety focused design where parts will not fall away, even when the lock is released.
  [Application]
  · For use when different applications call for changing the orientation of the nozzle by a significant amount.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	109.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

Loading...