HOZAN Cacciavite
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
- In Offerta fino al 30/06/2026
Alesatore affusolato K-441 / K-442 / K-443 / K-444
HOZAN
A taper reamer that boasts outstanding sharpness and durability.
[Features]
· K-441, K-442, K-443 and K-444 are available.
· Can be used in various applications according to the hole diameters and taper angles.
· Perfect for work that requires application of torque as it comes with a handle.
· Allows cutting by rotating clockwise.
· Excellent sharpness and outstanding durability.
[Applications]
· Ideal for modification and enlargement of holes in metal plates, aluminum plates, thin iron plates, etc.- Sconto volumi elevati
A partire da∗ ： 13.50 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Trapano a mano K-501
HOZAN
Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.
[Features]
· Features a rotary head with embedded ball bearings, which offers great workability.
· Vise for small diameter drills with rotating cap.
· It can be smoothly rotated while pushing in the vertical direction.
· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.
· It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.
· The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.
[Applications]
· It can also be used for etching by grasping a needle (probe), etc.- Sconto volumi elevati
A partire da∗ ： 24.20 € Consegna da ： 8 giorni *Prezzo unitario in configurazione base
-
Avvitatore a percussione D-963
HOZAN
Impact screwdriver that can be switched between left and right rotation.
[Features]
· Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
· It uses a flanged protective grip that protects the hand.
· Removing the bit holder allows a 12.7 mm square socket to be attached.
· Case included.
[Applications]
· Ideal for turning screws, etc. that take effort to loosen.- Sconto volumi elevati
A partire da∗ ： 5.60 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Cacciavite regolabile punta in ceramica sostituibile D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).- Sconto volumi elevati
A partire da∗ ： 68.80 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Trapano a mano K-502
HOZAN
Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.
[Features]
· As the main body is compact, it is easy to see the work at hand.
· Also, there is less load in continuous work as it is a light finish.
· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.
[Applications]
· It can also be used for drilling on precision parts and substrates, for plastic models, for etching by grasping a needle (probe), etc.
· A fixed-type collet, body-integral, compact single-head type.- Sconto volumi elevati
A partire da∗ ： 11.90 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Set di cacciaviti per regolazione in ceramica D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Sconto volumi elevati
A partire da∗ ： 77.10 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Cacciavite di precisione, set da 6【6 Pezzi per confezione】
HOZAN
High-precision screwdriver set with high versatility.
[Features]
· A set of +No.0/+No.1/-1.2 x 0.32/-1.8 x 0.32/-2.3 x 0.35/-3.0 x 0.45.
· Sewn case included.
[Applications]
· Ideal for fast turning of small screws thanks to its rotary-type head that provides high workability.- Sconto volumi elevati
A partire da∗ ： 22.20 € Consegna da ： 8 giorni *Prezzo unitario in configurazione base
-
Avvitatore elettrico a LED D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Sconto volumi elevati
A partire da∗ ： 14.60 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
| |
| Marchio | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Serie prodotto | ||||||||
| A partire da∗ | 13.50 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta fino al 30/06/2026Sconto volumi elevati | 24.20 € *Prezzo unitario in configurazione base Sconto volumi elevati | 5.60 € *Prezzo unitario in configurazione base Sconto volumi elevati | 68.80 € *Prezzo unitario in configurazione base Sconto volumi elevati | 11.90 € *Prezzo unitario in configurazione base Sconto volumi elevati | 77.10 € *Prezzo unitario in configurazione base Sconto volumi elevati | 22.20 € *Prezzo unitario in configurazione base | 14.60 € *Prezzo unitario in configurazione base Sconto volumi elevati |
| Consegna da ： | Stesso giorno | 8 giorni | 7 giorni | 7 giorni | 7 giorni | 7 giorni | 8 giorni | 7 giorni |
| Tip standards | Altro | - | Phillips (+) / Testa piatta (-) / Phillips (+)/Testa piatta (-) | Testa piatta (-) | - | Phillips (+)/Testa piatta (-) | Phillips (+)/Testa piatta (-) | Testa piatta (-) |
| Tip size / Phillips (+) | - | - | N. 2 / N. 3 / N. 4 | - | - | N. 0 | N. 0 / N. 1 | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | 8 ～ 10 | 0.9 ～ 2.6 | - | 1.3 ～ 1.8 | 1.2 ～ 3 | 2.5 |
| Shaft length L (mm) | - | - | 36 ～ 80 | - | - | 110 | - | 17 |
| Single Product/Set Classification | Articolo singolo | Articolo singolo | Articolo singolo / Set prodotto | Set prodotto | Articolo singolo | Set prodotto | Set prodotto | Articolo singolo |
| Shaft type | - | - | Tipo quadrato | Tipo rotondo | - | Tipo rotondo | Tipo rotondo | Tipo rotondo |
| Magnet | - | - | N/A | N/A | - | N/A | N/A | N/A |
| Shaft through | - | - | - | - | - | N/A | N/A | N/A |
| Bolster | - | - | - | - | - | N/A | N/A | N/A |
| Grip Type | Acciaio inox | - | Gomma | Resina | - | Resina | Acciaio inox | Resina |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | 0.4 | - | 0.4 | 0.32 ～ 0.45 | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Tip standards
- Phillips (+)
- Testa piatta (-)
- Phillips (+)/Testa piatta (-)
- Torx
- Scatola
- Esagono
- Tipo a sfera
- Combinazione
- Altro
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
-
Shaft type
-
Magnet
- Disponibile
- N/A
-
Shaft through
- Disponibile
- N/A
-
Bolster
- Incluso
- N/A
-
Grip Type
- Resina
- Manico in legno
- Gomma
- Acciaio inox
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Limitare la ricerca specificando il produttore
-
- WIHA (185)
- VESSEL (40)
- PB SWISS TOOLS (36)
- ANEX (33)
- MAEDAKINNZOKU (33)
- WERA (28)
- TRUSCO NAKAYAMA (25)
- KTC(KYOTO TOOL) (19)
- ENGINEER (14)
- PHOENIX CONTACT (10)
- HOZAN (8)
- SK 11 (7)
- BAHCO (6)
- GEDORE (5)
- SUNFLAG (5)
- BERNSTEIN AG (4)
- KNIPEX (4)
- HAZET (3)
- HIRAI KOGU (3)
- TRAD (3)
- WOLFCRAFT (2)
- EIGHT TOOL (2)
- E VALUE (2)
- SMATO (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- AS ONE (1)
- ESCO (1)
- MATADOR (1)
- OSG (1)
- PROXXON (1)
- RITTAL (1)
- WEIDMUELLER (1)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Cacciavite
-
- Chiavi dritte, chiavi curve, chiavi a cricchetto
- Chiavi a brugola
- Chiavi TORX
- Chiavi a bussola
- Cacciavite
- Pinze, tronchesini, tenaglie
- Set di attrezzi, cassette attrezzi
- Punte per cacciavite
- Pinzette
- Attrezzature per manutenzione di veicoli
- Utensili per rubinetteria e tubazioni aria condizionata
- Utensili per lamiere
- Utensili per cablaggi
-
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.