Supporti dritti（Profilo diam. interno cuscinetto：Foro cilindrico, ghiera eccentrica）

?* Informazioni su tempi di consegna e prezzi

• 

  Supporti cuscinetto / Con supporto

  MISUMI

  [Caratteristiche] Si tratta di un'unità di cuscinetti a blocco di cuscino senza lubrificazione. Sono disponibili 2 tipi: il tipo a vite fissa e il tipo ad anello eccentrico.

  • Sconto volumi elevati

  • Quantità d'ordine aumentate (D-JIT)

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.12 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Supporti cuscinetto / Con flangia a rombo

  MISUMI

  [Caratteristiche] Questo è un cuscinetto a sfere flangiato a due bulloni senza lubrificazione.

  • Sconto volumi elevati

  • Quantità d'ordine aumentate (D-JIT)

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.12 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  blocco supporto cuscinetto acciaio

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	37.60 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Unitá di supporto con cuscinetto tipo UP serie argento foro cilindrico con ruota eccentrica

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Supporto cuscinetto Serie argento modello con foro cilindro con ruota eccentrica

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	62.80 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Supporto dritto in lamiera di acciaio

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.10 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

Loading...