TE CONNECTIVITY Connettori in nylon（Direzione collegamento：Angolo）
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
- In Offerta fino al 30/06/2026
- Raccomandazione
Serie D3000
TE CONNECTIVITY
The D-3000 series, compatible with a wide range of dynamic main series sizes.
[Features]
· Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
· Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
· Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
· High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
· Newly developed copper alloy material realized with a reliable 3-point contact construction.
· Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
· Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D
A partire da∗ ： 1.30 € Prezzo speciale Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Serie D5000
TE CONNECTIVITY
A D-5000 Series connector for use with equipment main power supply lines.
[Features]
· High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
· By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
· The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
· The contacts can be selected to match the application.
· Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
· The long tab was developed for sequential coupling of tab contacts.
· By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
· High current tines (lead): This type of tine (lead) mounts to a circuit board.
· A newly developed twin lead type.
· This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
· IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
· By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D
A partire da∗ ： 4.90 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
- In Offerta fino al 30/06/2026
Serie D1000
TE CONNECTIVITY
The D-1000 Series are the smallest connectors within the Dynamic Series range.
[Features]
[Supports a wide range of wires]
· This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
[Crimp tool with interchangeable dies]
· The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
[A full Series lineup]
· The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
· The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
· The Series lineup includes different color versions in addition to the previous standard black color.
· In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
· The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
· Contact options support an extensive range of uses based on application, quality, and cost considerations.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D
A partire da∗ ： 1.30 € Prezzo speciale Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Serie D2000
TE CONNECTIVITY
The D-2000 Series remains small while satisfying specifications for industrial equipment.
[Features]
Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
· Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
· Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
· Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
· Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
· Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D
A partire da∗ ： 1.20 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
- In Offerta fino al 30/06/2026
Connettore Universal Mate-N-Lok
TE CONNECTIVITY
Universal Mate-N-Lok conforms to UL and CSA standards.- Sconto volumi elevati
A partire da∗ ： 5.00 € Prezzo speciale Consegna da ： 6 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da ： |
| Profilo connettore |
| A· B· C |
| D· E· F |
| G· H· I |
| J· K· L |
| M· N· O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Y e Z |
| Katakana |
| Numero |
| Pin/contatto applicabile |
| Numero di conduttori |
| Applicazione |
| Corrente ammessa(A) |
| Tensione ammessa(V) |
| Metodo di collegamento filo |
| Direzione collegamento |
| Funzione di protezione (resistenza ambientale) |
| Standard rappresentativo |
|
|
|
|
| |
| Marchio | TE CONNECTIVITY | TE CONNECTIVITY | TE CONNECTIVITY | TE CONNECTIVITY | TE CONNECTIVITY |
| Serie prodotto | |||||
| CAD |
|
|
|
| |
| A partire da∗ | 1.30 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta fino al 30/06/2026Sconto volumi elevati | 4.90 € *Prezzo unitario in configurazione base Sconto volumi elevati | 1.30 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta fino al 30/06/2026Sconto volumi elevati | 1.20 € *Prezzo unitario in configurazione base Sconto volumi elevati | 5.00 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta fino al 30/06/2026Sconto volumi elevati |
| Consegna da ： | 6 giorni | 6 giorni | 6 giorni | 6 giorni | 6 giorni |
| Profilo connettore | Profilo quadrato | Profilo quadrato | Profilo quadrato | Profilo quadrato | Profilo quadrato |
| A· B· C | - | - | - | - | - |
| D· E· F | - | - | - | - | - |
| G· H· I | - | - | - | - | - |
| J· K· L | - | - | - | - | - |
| M· N· O | - | - | - | - | - |
| P· Q· R | - | - | - | - | - |
| S· T· U | - | - | - | - | - |
| V· W· X | - | - | - | - | - |
| Y e Z | - | - | - | - | - |
| Katakana | Dynamic | Dynamic | Dynamic | Dynamic | Mate-N-Lok universale |
| Numero | - | - | - | - | - |
| Pin/contatto applicabile | Maschio (spina) | Maschio (spina) | Maschio (spina) | Maschio (spina) | Maschio (spina) |
| Numero di conduttori | 2 ～ 20 | 3 ～ 4 | 4 ～ 34 | 3 ～ 20 | 2 ～ 3 |
| Applicazione | Per PCB | Per PCB | Per PCB | Per PCB | Per PCB |
| Corrente ammessa(A) | 15 | 30 | 3 ～ 5 | 5 | 10 |
| Tensione ammessa(V) | 250 ～ 600 | 630 | 125 ～ 250 | 250 | 500 |
| Metodo di collegamento filo | - | Saldatura | Saldatura | Saldatura | Saldatura |
| Direzione collegamento | Angolo | Angolo | Angolo | Angolo | Angolo |
| Funzione di protezione (resistenza ambientale) | N/A | Disponibile / N/A | N/A | N/A | N/A |
| Standard rappresentativo | UL / TUV / CSA | UL / TUV / CSA | UL / TUV / CSA | UL / TUV / CSA | UL / CSA |
Loading...
Seleziona per:
Limitare la ricerca specificando Spec./Dim.
-
Profilo connettore
- Tipo rotondo
- Profilo quadrato
- Altro
-
A· B· C
- Altro
-
D· E· F
- EH
- EL
-
G· H· I
- Altro
-
J· K· L
- Altro
-
M· N· O
- N
- NH
- Altro
-
P· Q· R
- PH
- Altro
-
S· T· U
- SM
-
V· W· X
- XH
- VH
- Altro
-
Y e Z
- Altro
-
Katakana
- Dynamic
- Commercial MATE-N-LOK
- Mini Universal Mate-N-Lok
- Mate-N-Lok universale
- Altro
-
Numero
- 1625
-
Pin/contatto applicabile
- Maschio (spina)
- Femmina (presa)
- Uso combinato maschio/femmina
- Altro
-
Numero di conduttori
-
Applicazione
-
Corrente ammessa(A)
-
Tensione ammessa(V)
-
Metodo di collegamento filo
- Saldatura
- Crimpatura
- Saldatura a pressione
- Fissaggio con viti
- Altro
-
Direzione collegamento
- Dritto
- Angolo
- Altro
-
Funzione di protezione (resistenza ambientale)
-
Standard rappresentativo
Limitare la ricerca specificando il produttore
-
- MOLEX (11)
- TE CONNECTIVITY (5)
- JST (JST Manufacturing) (3)
- WAGO (3)
- SOURIAU (1)
- SUNHAYATO (0)
- TRUSCO NAKAYAMA (0)
- SUMIKO TEC (0)
- WEIDMUELLER (0)
- OHM ELECTRIC (0)
- SATO PARTS (0)
- NICHIFU TERMINAL INDUSTRIES (0)
- OMRON (0)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Connettori in nylon
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.