NIHON PISCO Ventose（Materiale：Gruppo gomma）

?* Informazioni su tempi di consegna e prezzi

• 

  Ventosa con soffietto VPF

  NIHON PISCO

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	29.70 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Modello a corsa lunga con soffietto VPC con giunto one-touch con coperchio

  NIHON PISCO

  Suction is possible even when distance between pad and workpiece is not fixed. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	32.40 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Modello a corsa lunga antiscivolo VPD con giunto one-touch con copertura

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The vacuum pad can adhere to the material even if the distance between them varies.
  · A wide range of pad sizes, pad materials, and holder shapes are available.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	30.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  VENTOSA morbida modello VPB con giunto one-touch

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched workpieces. *CAD data is now being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere plastic molded parts, leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, making it possible to save space.
  · As with the conventional version, you can change the pad section without removing the holder from the equipment.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD and VPHE types) with vacuum inlet on both sides

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.10 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Cuscino ammortizzatore del vuoto di tipo leggero VPF

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched workpieces. *CAD data for this series is now being modified. It will be available as soon as the modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere to plastic molded parts leaving relatively little trace.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Holders (A and B types) for existing vacuum pads have been made smaller, making it possible to save space.
  • Pad holders (VPHD and VPHE types) with vacuum inlets on both sides are now available.
  · Pad holders have been added for applications requiring "copper based metal not used" and "measures to reduce ozone concentration."

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	28.30 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa morbida in gomma

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched materials
  
  [Features]
  · The SUS pad rubber is flexible enough to adhere plastic molded parts while leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD and VPHE types) with vacuum inlet on both sides is now available.
  · Optimal for usage in adhering and transporting molded products by connecting several vacuum pads to one vacuum source.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.20 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ventosa con soffietto multistage VPF

  NIHON PISCO

  * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
  
  [Features]
  · Supports tilted work and transport of vinyl packages.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads to save space.
  · As is conventionally done, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added to applications with "copper-based metal not used" and "reduce ozone concentrations” requirements.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	34.60 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa in gomma con soffietto multistage

  NIHON PISCO

  [Features]
  · Supports transportation of tilted work and vinyl packages.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Saves space by downsizing holders (A and B types) for existing vacuum pads.
  · As is conventional, the pad section can be replaced without removing the holder from the equipment.
  · In addition, it also supports the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	9.60 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ventosa ovale modello VPC con giunto one-touch

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for conveying long items such as circuit boards and semiconductors.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Tappettino per vuoto Modello Ovale VPF

  NIHON PISCO

  Ideal for the transport of long jobs, such as a substrate or a semiconductor *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.10 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa ovale modello in gomma

  NIHON PISCO

  [Features]
  · Ideal for conveying long work pieces such as circuit boards and semiconductors.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, making it possible to save on space.
  · As normal, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is also compatible with the optional fall prevention valve and direct pad attachment type filter.
  · Pad holders have been added for applications requiring "no copper based metals to be used" and "low ozone concentration measures."
  · No copper-based metal is used for metal parts. HNBR is used for the rubber sealing material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.80 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Modello Standard VPA Modello con giunto one touch

  NIHON PISCO

  Ideal for thick and flat general work
  
  [Features]
  · Containers of various shapes are available, including a general type ideal for flat work (work that is hard and of a non-flimsy thickness), a deep type ideal for round fruit (apples, etc.) and balls, and a small type ideal for small work or for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	14.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Ventosa modello standard VPF

  NIHON PISCO

  Thick and flat construction is ideal for general work, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including a general type suitable for flat work (hard enough not to flap around), a deep type suitable for round fruits (apples, etc.) and balls, and a small type suitable for small work and for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.
  · Copper-based metal is not used for the metal parts. HNBR is used for the sealing rubber material

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	24.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa tipo standard in gomma

  NIHON PISCO

  Thick and flat, ideal for general work
  
  [Features]
  · Deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "copper based metal not used" and "measures to reduce ozone concentration."
  · Copper-based metal not used for metal parts. HNBR is used for sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa piccola tipo standard in gomma

  NIHON PISCO

  Small vacuum pad ideal for use in semiconductor manufacturing facilities

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Pompa aspiratore aria con pinzetta

  NIHON PISCO

  Optimal for transporting small parts * This series is undergoing CAD data revision. This will be available as soon as modifications are complete.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	43.20 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Pachetto aspiratore aria con pinzetta

  NIHON PISCO

  · Optimally suited for transporting small components.
  
  [Features]
  · An Air Pincette with a vacuum pad and built-in vacuum generator in pen-type main body.
  · Optimally suited for the assembly of small components.
  · Built-in valve type: The VTB type saves energy due to its low noise and air flow — only when it is in use.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  A partire da∗ ：	56.70 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Pompa aspiratore aria con pinzetta senza valvola

  NIHON PISCO

  Optimal for transporting small parts *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Air pin set with a vacuum pad and vacuum generator are built into the the pen-type main body.
  · Ideal for assembly of small components.
  · Valve built-in type: VTB saves energy due to low noise and air flows which occur only during usage

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	34.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa modello standard VPB raccordi portagomma

  NIHON PISCO

  Thick and flat, ideal for general work. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including the general type suitable for flat work surfaces (ones that are rigid enough not to flap), the deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.90 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ventosa modello standard VPF

  NIHON PISCO

  Optimal for work involving such things as round fruits and balls. * CAD data being revised for this series. This will be available as soon as modifications are complete.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	28.70 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• 

  Ventosa a soffietti morbidi VPF

  NIHON PISCO

  Excellent flexibility, ideal for adherence of paper, plastic molded articles, etc. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere plastic molded parts while leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD,

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	30.10 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa a soffietti in gomma

  NIHON PISCO

  An extremely soft type fitting that is optimally suited for adhering to paper and plastic molded artifacts.
  
  [Features]
  · The pad rubber has superior elasticity for adhering to paper, etc. In addition, adhering to plastic molded artifacts leaves relatively no trace.
  · This fitting is offered in a wide range of pad sizes, pad materials, and holder shapes.
  · The holders (A and B types) have been downsized for existing vacuum pads making it possible to save space.
  · The pad can be changed in the normal way without detaching the holder from the equipment.
  · In addition, this fitting is also compatible with the optional fall prevention valve and the directly attachable type pad filters.
  · Fittings with vacuum outlets on both sides of the pad holder (VPHD and VPHE types) are also now available. This fitting is optimally suited for use in adhering/transporting molded artifacts by linking multiple vacuum pads to a single vacuum source.
  · Pad holders have been added for applications that require the use of non-copper based metals and measures against low-concentration ozone.
  · No copper-based metals are used in the metal component materials. HNBR is utilized for the rubber sealing material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	5.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa a soffietti in gomma

  NIHON PISCO

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	6.50 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ventosa anti-scivolo VPF

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for transport of oil-stained works such as press parts.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The ingenuity of the pad shape prevents slipping of the work during transport.
  · Pad durability increased under oily environment by the use of oil-resistant NBR.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	28.40 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa anti-scivolo in gomma

  NIHON PISCO

  * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for transport of oil-stained works, such as press parts.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The innovative work pad shape prevents the work from slipping during transport due to the attached oil.
  · Pad durability is increased in oily environments with oil-resistant NBR.
  · Downsizes holders (A and B types) for existing vacuum pads to save space.
  · As is conventionally done, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders were added to applications with "copper-based metal not used" and "reduce ozone concentrations” requirements.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.
  · As is conventionally done, you can change the pad section without removing the holder from the equipment.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.50 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ventosa sottile VPA ad attacco rapido

  NIHON PISCO

  Optimal for conveying thin media such as copying paper and vinyl. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The adsorption is improved and redundant adhesion is mitigated by the thinner lip, improving the adhesiveness to the media.
  · Downsizes holders (A, B, and E types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	14.40 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa sottile VPE

  NIHON PISCO

  Optimal for conveying thin media such as copying paper and vinyl. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The adsorption is improved and redundant adhesion is mitigated by the thinner lip, improving the adhesiveness to the media.
  · Downsizes holders (A, B, and E types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	13.10 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Ventosa sottile VPF

  NIHON PISCO

  Ideal for transportation of thin work such as copying paper and vinyl. *CAD data is being revised for this series. Available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Adsorption is improved and redundant adhesion has been mitigated by thinning the lip and improving adhesiveness to the work.
  · Saves space by downsizing holders (A, B, and E types) for existing vacuum pads.
  · As is conventional, the pad section can be replaced without removing the holder from the equipment.
  · In addition, it also supports the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	25.40 €
  Consegna da ：	11 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/06/2026

  

  Ventosa sottile in gomma

  NIHON PISCO

  Optimal for transferring thin media such as copying paper and vinyl, etc.
  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The adsorption is improved and redundant adhesion is mitigated by the thinner lip, improving the adhesiveness to the media.
  · Downsizes holders (A, B, and E types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	3.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...