Codice articolo del costruttore: VQZ312-5YOS1-C8F-Q
Marca: SMC
Prezzo: 82.30 €
Tempi di consegna: 24 giorni
Caratteristiche: Senza lubrificazione
A commutazione: 2 posizioni normalmente chiuso
Tensione: 24 V DC
Tipo di attacco tubo: Tubazioni ad attacco rapido
Filettatura tubazione nominale: -
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
VQZ312-5YOS1-C8F-Q

3-Port Solenoid Valve VQZ100/VQZ200/VQZ300 Series, single unit, body ported type external appearance
| Valve Construction | Metal Seal | Rubber Seal | VQZ100 (poppet seal) |
|---|---|---|---|
| Fluid | Air | ||
| Maximum Operating Pressure (MPa) | 0.7 (High-pressure type: 1.0) | 0.7 | 0.7 (High-pressure type: 1.0) |
| Minimum Operating Pressure MPa | 0.1 | 0.15 | 0.15 |
| Ambient Temperature and Operating Fluid Temperature °C | -10 to +50 (no freezing) | ||
| Maximum Operating Frequency Hz | 20 | 5 | 20 |
| Pilot valve exhaust method | Individual exhaust | Centralized exhaust *1 | |
| Lubrication | Not required | ||
| Manual | Push type / locking type (tool required) | ||
| Mounting Orientation | Free | ||
| Impact Resistance / Vibration Resistance: m/s2 * | 150/30 | ||
| Enclosure * | Dust-proof (DIN terminal: IP65 *3) | ||
*Based on IEC60529.
*1: The body ported type single unit uses individual exhaust.
*2: Shock resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*3: When IP65 compliant DIN terminals: VQZ2/3□2□-□Y□□W1-□□
| Electrical Entry | Grommet (G) M-type plug connector (M) L-type plug connector (L) DIN terminal (Y) | |||
|---|---|---|---|---|
| G, L, M | Y | |||
| Coil rated voltage (V) | DC | 24, 12 | ||
| AC 50/60 Hz | 100, 110, 200, 220 * | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage * | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| High Speed Response, High Pressure | 0.9 (with light: 0.95 [with DIN terminal light: 1.0]) | |||
| Apparent power VA * | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V [115 V] | 0.86 (with light: 0.89) [0.94 (with light: 0.97)] | 0.86 (with light: 0.87) [0.94 (with light: 1.07)] | ||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V [230 V] | 1.30 (with light: 1.34) [1.42 (with light: 1.46)] | 1.27 (with light: 1.46) [1.39 (with light: 1.60)] | ||
| Surge Voltage Suppressor | Varistor | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
(Unit: mm)

Single unit / grommet (G): VQZ115□-□G□1-C3, C4, C6-PR dimensional drawing
*See p. 1258 in the SMC catalog for P and R port single-action fittings and silencer model numbers.
(Unit: mm)

Type with bracket dimensional drawing
*See p. 1237 in the SMC catalog for the bracket assembly model number.
(Unit: mm)

Single unit / grommet (G): VQZ2□2□-□G□1-C4, C6 dimensional drawing
*See p. 1258 in the SMC catalog for P and R port single-action fittings and silencer model numbers.
(Unit: mm)

Type with bracket dimensional drawing
*See p. 1237 in the SMC catalog for the bracket assembly model number.
(Unit: mm)

Single unit / grommet (G): VQZ3□2□-□G□1-C6, C8, C10 dimensional drawing
(Unit: mm)

Type with bracket dimensional drawing
*See p. 1237 in the SMC catalog for the bracket assembly model number.

VQZ100 poppet type structure drawing
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Resin | - |
| 2 | Spool Valve | Aluminum/HNBR | - |
| 3 | Pilot Valve Assembly | - | - |
| 4 | P.R Plate | Resin/aluminum | VQZ100-12A (standard specifications) VQZ100-12B (external pilot) * |
*Not possible to change from standard to external pilot specification.

VQZ200, VQZ300 metal-seal type structure drawing

VQZ200, VQZ300 rubber seal type structure drawing
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Die-cast aluminum | - |
| 2 | Spool/Sleeve | Stainless steel | Metal Seal |
| Spool Valve | Aluminum/HNBR | Rubber Seal | |
| 3 | Piston | Resin | - |
| 4 | Pilot Valve Assembly | - | - |
*See p. 1237 in the SMC catalog for the pilot valve assembly model number.
Codice componente
|
|---|
| VQZ312-5YOS1-C8F-Q |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Caratteristiche | A commutazione | Tensione | Tipo di attacco tubo | Filettatura tubazione nominale | Valore CV | Diametro tubo di collegamento | Con tenuta | Pressione nominale (MPa) | Mandata aria pilota | Interruttore manuale | Ingresso elettrico conduttore | Manuale | Spia / circuito di protezione | Staffa | Misura corpo | Funzioni | Type of fitting thread part | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
82.30 € | 1 | 24 giorni | Senza lubrificazione | 2 posizioni normalmente chiuso | 24 V DC | Tubazioni ad attacco rapido | - | 0.62 | Ø8 | Standard | 0.1–0.7 | Circuito | Senza bloccaggio | Terminale DIN senza connettore (specifiche DC) | Senza blocco, a pressione | Con circuito di protezione | Assente | 18 mm (Larghezza) | Standard | G |
Loading...
| Tipo | Elettrovalvole | Applicazione | Uso singolo | Numero di attacchi | Valvola a 3 porte |
|---|---|---|---|---|---|
| Metodo di installazione | Diretto | Numero di solenoidi | Tipo singolo | Stato allo spegnimento | Autoreset (ritorno molla) |
| Tubazioni | Collegamento diretto | Tipo di azionamento | Stelo pilota | Conformità CE | Prodotto con conformità CE |
Si trova sulla pagina di Elettrovalvola a 3 porte serie VQZ100 / 200 / 300, unità singola, raccordi su corpo, il codice articolo è il seguente: VQZ312-5YOS1-C8F-Q.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto VQZ312-5YOS1-C8F-Q.
Configura
Proprietà di base
Filettatura tubazione nominale
Tipo
Caratteristiche
A commutazione
Tensione
Tipo di attacco tubo
Valore CV
Diametro tubo di collegamento
Con tenuta
Pressione nominale(MPa)
Mandata aria pilota
Interruttore manuale
Ingresso elettrico conduttore
Manuale
Spia / circuito di protezione
Staffa
Misura corpo
Funzioni
Type of fitting thread part
Filtrare per tipo dati CAD
Filtrare per giorni di spedizione standard
Attributi opzionali
| Codice componente |
|---|
| VQZ115-5G1-C6-PRF-Q |
| VQZ115-5G1-M5-PR-Q |
| VQZ115-5G1-M5-PRF-Q |
| VQZ312-5YOSB1-02-Q |
| VQZ312-5YZ1-02-Q |
| VQZ312-5YZ1-C10-Q |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Caratteristiche | A commutazione | Tensione | Tipo di attacco tubo | Filettatura tubazione nominale | Valore CV | Diametro tubo di collegamento | Con tenuta | Pressione nominale (MPa) | Mandata aria pilota | Interruttore manuale | Ingresso elettrico conduttore | Manuale | Spia / circuito di protezione | Staffa | Misura corpo | Funzioni | Type of fitting thread part |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
73.80 € | 1 | 22 giorni | Standard | 2 posizioni normalmente chiuso | 24 V DC | Tubazioni ad attacco rapido | - | 0.17 | Ø6 | Standard | 0.1–0.7 | Circuito | Senza bloccaggio | Anello di tenuta (lunghezza filo conduttore: 300mm)$Grommet lead wire 0.3 m | Non bloccabile a pressione (con utensile) | - | Con staffa | Larghezza: 10mm | Tipo standard | Rc | ||
70.77 € | 1 | 26 giorni | Standard | 2 posizioni normalmente chiuso | 24 V DC | M | M5 | 0.17 | - | Standard | 0.1–0.7 | Circuito | Senza bloccaggio | Anello di tenuta (lunghezza filo conduttore: 300mm)$Grommet lead wire 0.3 m | Non bloccabile a pressione (con utensile) | - | Assente | Larghezza: 10mm | Tipo standard | - | ||
73.79 € | 1 | 26 giorni | Standard | 2 posizioni normalmente chiuso | 24 V DC | M | M5 | 0.17 | - | Standard | 0.1–0.7 | Circuito | Senza bloccaggio | Anello di tenuta (lunghezza filo conduttore: 300mm)$Grommet lead wire 0.3 m | Non bloccabile a pressione (con utensile) | - | Con staffa | Larghezza: 10mm | Tipo standard | - | ||
83.08 € | 1 | 26 giorni | Standard | 2 posizioni normalmente chiuso | 24 V DC | [Rc (R)] Rc | 1/4 | 0.62 | - | Standard | 0.1–0.7 | Circuito | Blocco | Terminale DIN senza connettore (specifiche DC) | Bloccabile (con utensile) | - | Assente | Larghezza: 18mm | Tipo standard | - | ||
87.93 € | 1 | 25 giorni | Standard | 2 posizioni normalmente chiuso | 24 V DC | [Rc (R)] Rc | 1/4 | 0.62 | - | Standard | 0.1–0.7 | Circuito | Senza bloccaggio | Terminale DIN (con spia / circuito di protezione) | Non bloccabile a pressione (con utensile) | - | Assente | Larghezza: 18mm | Tipo standard | - | ||
92.08 € | 1 | 25 giorni | Standard | 2 posizioni normalmente chiuso | 24 V DC | Tubazioni ad attacco rapido | - | 0.62 | Ø10 | Standard | 0.1–0.7 | Circuito | Senza bloccaggio | Terminale DIN (con spia / circuito di protezione) | Non bloccabile a pressione (con utensile) | - | Assente | Larghezza: 18mm | Tipo standard | Rc |