Stainless Steel-Levelling feet (23-100-M10-80-D0-S)
- In Offerta fino al 30/06/2026
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: 23-100-M10-80-D0-S
Marca: GANTER
Prezzo: 69.20 €
Tempi di consegna: 7 giorni
Dati Tecnici:
Diameter d1: 100
Thread d2: M 10
Length l1: 80
Length l2 (V/VK): -
Length l3 (W): -
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
23-100-M10-80-D0-S
GN 23 with Mounting Holes / Stainless Steel-Levelling Feet with Turned Base Plate
Information
Stainless Steel-Levelling feet GN 23 will be delivered mounted and are not removable.
see also...
• Stainless Steel-Levelling feet GN 31
• Stainless Steel-Levelling feet GN 41
How to Order
How to order (with mounting holes) | 1 | d1 |
| 2 | d2 | |
| 3 | l1 (l2, l3, l7) | |
| 4 | Type (Base plate) | |
| 5 | Version (Stem) |
Specification
Stainless Steel AISI 304
• Threaded stem
Stainless Steel AISI 303
• Hexagon nut ISO 4032
Stainless Steel AISI 304
• Rubber underlay, inlaid
Perbunan® (NBR), 70 Shore A
• Stainless Steel characteristics
• Elastomer characteristics
• Load rating information
• RoHS compliant
Dimensions
 |  |  |  |  |  | |||||||||||||||
| d1 | d2 | l1 | l2 | l3 ≈ | l7 | k | ||||||||||||||
| Version | Version | Version | Version | Version | ||||||||||||||||
| S / SK | T / TK and U / UK | V / VK | W | X | ||||||||||||||||
| 80 | M 8 | 40 | 50 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 34 | 54.5 |
| 80 | M 10 | 50 | 60 | 80 | 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | 37 | 54.5 |
| 80 | M 12 | 60 | 80 | 100 | 125 | - | - | - | - | - | - | - | - | - | - | - | - | - | 40 | 54.5 |
| 80 | M 16 | - | - | - | - | 75 | 100 | 125 | 150 | 200 | 75 | 100 | 125 | 150 | 118 | 143 | 168 | 193 | 46 | 54.5 |
| 80 | M 20 | - | - | - | - | 75 | 100 | 125 | 150 | 200 | 100 | 125 | 150 | 200 | 143 | 168 | 193 | 243 | 54 | 54.5 |
| 80 | M 24 | - | - | - | - | 100 | 125 | 150 | 200 | - | 100 | 150 | 200 | - | 168 | 218 | 268 | - | - | 54.5 |
| 100 | M 8 | 40 | 50 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 35 | 70.5 |
| 100 | M 10 | 50 | 60 | 80 | 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | 70.5 |
| 100 | M 12 | 60 | 80 | 100 | 125 | - | - | - | - | - | - | - | - | - | - | - | - | - | 41 | 70.5 |
| 100 | M 16 | - | - | - | - | 75 | 100 | 125 | 150 | 200 | 75 | 100 | 125 | 150 | 119 | 144 | 169 | 194 | 47 | 70.5 |
| 100 | M 20 | - | - | - | - | 75 | 100 | 125 | 150 | 200 | 100 | 125 | 150 | 200 | 144 | 169 | 194 | 244 | 55 | 70.5 |
| 100 | M 24 | - | - | - | - | 100 | 125 | 150 | 200 | - | 100 | 150 | 200 | - | 169 | 219 | 269 | - | - | 70.5 |
| 120 | M 20 | - | - | - | - | 75 | 100 | 125 | 150 | 200 | - | - | - | - | - | - | - | - | 59 | 95.5 |
| 120 | M 24 | - | - | - | - | 100 | 125 | 150 | 200 | - | - | - | - | - | - | - | - | - | - | 95.5 |
| 120 | M 30 | - | - | - | - | 100 | 125 | 150 | 200 | - | - | - | - | - | - | - | - | - | - | 95.5 |
Versions of Threaded Stem
 |  |  |
| External hexagon at the bottom | Wrench flat at the bottom | Hexagon socket at the top |
| M 8, M 10, M 12 | M 16, M 20, M 24, M 30 | Wrench flat at the bottom |
| "not dipping" version | M 16, M 20, M 24, M 30 |
 |  |  |
| External hexagon at the top | Hygienic version | External hexagon |
| Wrench flat at the bottom | Wrench flat at the bottom | Female thread |
| M 16, M 20, M 24 | M 16, M 20, M 24 | M 8, M 10, M 12, M 16, M 20 |
| d1 | d2 | d3 | h1 | h2 | h3 | h4 | h5 | l4 | l5 | l6 | A/F1 | A/F2 | A/F3 | A/F4 | A/F5 | A/F6 | A/F7 | t |
| 80 | M 8 | - | 8.5 | 2 | 19.5 | - | - | - | - | - | 17 | - | - | - | - | - | 14 | 8 |
| 80 | M 10 | - | 8.5 | 2 | 19.5 | - | - | - | - | - | 17 | - | - | - | - | - | 14 | 10 |
| 80 | M 12 | - | 8.5 | 2 | 19.5 | - | - | - | - | - | 17 | - | - | - | - | - | 17 | 12 |
| 80 | M 16 | 24 | 8.5 | 2 | - | 25.5 | 21.5 | 45 | 45 | 29 | - | 12 | 8 | 10 | 12 | 20 | 22 | 16 |
| 80 | M 20 | 30 | 8.5 | 2 | - | 27 | 23 | 56 | 56 | 36 | - | 15 | 10 | 13 | 16 | 24 | 27 | 20 |
| 80 | M 24 | 35 | 8.5 | 2 | - | 30.5 | 26 | 67 | 67 | 42 | - | 19 | 12 | 17 | 20 | 30 | - | - |
| 100 | M 8 | - | 9 | 3 | 20.5 | - | - | - | - | - | 17 | - | - | - | - | - | 14 | 8 |
| 100 | M 10 | - | 9 | 3 | 20.5 | - | - | - | - | - | 17 | - | - | - | - | - | 14 | 10 |
| 100 | M 12 | - | 9 | 3 | 20.5 | - | - | - | - | - | 17 | - | - | - | - | - | 17 | 12 |
| 100 | M 16 | 24 | 9 | 3 | - | 26.5 | 22.5 | 45 | 45 | 32 | - | 12 | 8 | 10 | 12 | 20 | 22 | 16 |
| 100 | M 20 | 30 | 9 | 3 | - | 28 | 24 | 56 | 56 | 40 | - | 15 | 10 | 13 | 16 | 24 | 27 | 20 |
| 100 | M 24 | 35 | 9 | 3 | - | 31.5 | 27 | 67 | 67 | 48 | - | 19 | 12 | 17 | 20 | 30 | - | - |
| 120 | M 20 | - | 12 | 3.5 | - | 32 | - | - | - | - | - | 15 | 10 | - | - | - | 27 | 20 |
| 120 | M 24 | - | 12 | 3.5 | - | 35.5 | - | - | - | - | - | 19 | 12 | - | - | - | - | - |
| 120 | M 30 | - | 12 | 3.5 | - | 39.5 | - | - | - | - | - | 24 | 12 | - | - | - | - | - |
Load Rating of Stainless Steel-Levelling Feet GN 23
Information
The values given in the table (valid for type D0 without rubber underlay) assume a clean pressure load perpendicular to the base plate. Bending and buckling stress which often occurs in practice results in a lower load-bearing capacity of the adjustment spindle and may have to be taken into account.
The details given on strength are non-binding guide values without any liability. In general, they do not constitute a warranty of quality.
The user must determine from case to case if a product is suitable for the intended purpose or use. Environmental factors may influence the stated values
Dimensions
| d1 | d2 | Static load in kN | ||||
| Versions of threaded stem | ||||||
| S / SK | T / TK and U / UK | V / VK | W | X | ||
| 80 | M 8 | 6 | - | - | - | 17 |
| 80 | M 10 | 11 | - | - | - | 17 |
| 80 | M 12 | 16 | - | - | - | 17 |
| 80 | M 16 | - | 17 | 21 | 25 | 17 |
| 80 | M 20 | - | 28 | 35 | 35 | 28 |
| 80 | M 24 | - | 46 | 52 | 52 | - |
| 100 | M 8 | 6 | - | - | - | 17 |
| 100 | M 10 | 11 | - | - | - | 17 |
| 100 | M 12 | 16 | - | - | - | 17 |
| 100 | M 16 | - | 17 | 21 | 25 | 17 |
| 100 | M 20 | - | 28 | 35 | 35 | 28 |
| 100 | M 24 | - | 46 | 52 | 52 | - |
| 120 | M 20 | - | 28 | - | - | 28 |
| 120 | M 24 | - | 46 | - | - | - |
| 120 | M 30 | - | 43 | - | - | - |
Codice componente
|
|---|
| 23-100-M10-80-D0-S |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Diameter d1 | Thread d2 | Length l1 | Length l2 (V/VK) | Length l3 (W) | Length l7 (X) | Type (Base) | Version (Screw) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
69.20 € | 1 | Disponibile | 7 giorni | 100 | M 10 | 80 | - | - | - | D0, fine turned, without rubber underlay | S, without locknut, external hexagon at the bottom |
Loading...
Si trova sulla pagina di Stainless Steel-Levelling feet, il codice articolo è il seguente: 23-100-M10-80-D0-S.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 23-100-M10-80-D0-S.
Configura
Proprietà di base
-
Length l2 (V/VK)
- 75
- 100
- 125
- 150
- 200
-
Length l3 (W)
-
Length l7 (X)
-
Tipo
-
Diameter d1
-
Thread d2
- M 8
- M 10
- M 12
- M 16
- M 20
- M 24
- M 30
-
Length l1
-
Type (Base)
-
Version (Screw)
- S, without locknut, external hexagon at the bottom
- SK, with locknut, external hexagon at the bottom
- T, without locknut, wrench flat at the bottom
- TK, with locknut, wrench flat at the bottom
- U, without locknut, internal hexagon at the top, wrench flat at the bottom
- UK, with locknut, internal hexagon at the top, wrench flat at the bottom
- V, without locknut, external hexagon at the top, wrench flat at the bottom
- VK, with locknut, external hexagon at the top, wrench flat at the bottom
- W, with adjustable sleeve, covered thread, wrench flat at the bottom
- X, external hexagon, female thread
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 7 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| 23-100-M10-100-D1-SK |
| 23-100-M10-38-D0-X |
| 23-100-M10-38-D1-X |
| 23-100-M10-80-D0-SK |
| 23-100-M10-80-D1-S |
| 23-100-M10-80-D1-SK |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Diameter d1 | Thread d2 | Length l1 | Length l2 (V/VK) | Length l3 (W) | Length l7 (X) | Type (Base) | Version (Screw) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
76.04 € | 1 | Disponibile | 7 giorni | 100 | M 10 | 100 | - | - | - | D1, fine turned, with rubber underlay, inlaid, black | SK, with locknut, external hexagon at the bottom | |
65.80 € | 1 | Disponibile | 7 giorni | 100 | M 10 | - | - | - | 38 | D0, fine turned, without rubber underlay | X, external hexagon, female thread | |
71.90 € | 1 | Disponibile | 7 giorni | 100 | M 10 | - | - | - | 38 | D1, fine turned, with rubber underlay, inlaid, black | X, external hexagon, female thread | |
69.46 € | 1 | Disponibile | 7 giorni | 100 | M 10 | 80 | - | - | - | D0, fine turned, without rubber underlay | SK, with locknut, external hexagon at the bottom | |
75.44 € | 1 | Disponibile | 7 giorni | 100 | M 10 | 80 | - | - | - | D1, fine turned, with rubber underlay, inlaid, black | S, without locknut, external hexagon at the bottom | |
75.68 € | 1 | Disponibile | 7 giorni | 100 | M 10 | 80 | - | - | - | D1, fine turned, with rubber underlay, inlaid, black | SK, with locknut, external hexagon at the bottom |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.