TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TAC-HRESDB4.2
Codice componente
|
|---|
| TAC-HRESDB4.2 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | |
|---|---|---|---|---|
107.05 € | 1 | Disponibile | 5 giorni |
Loading...
Specifiche
Model Number
TAC-HRESDB (Stub)
| Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
| 3 | 20 | 62 | 6 |
| 3.3 | 20 | 62 | 6 |
| 3.5 | 20 | 62 | 6 |
| 4 | 24 | 66 | 6 |
| 4.2 | 24 | 66 | 6 |
| 4.5 | 24 | 66 | 6 |
| 5 | 28 | 66 | 6 |
| 5.5 | 28 | 66 | 6 |
| 6 | 28 | 66 | 6 |
| 6.5 | 34 | 79 | 8 |
| 6.8 | 34 | 79 | 8 |
| 7 | 34 | 79 | 8 |
| 7.5 | 41 | 79 | 8 |
| 7.8 | 41 | 79 | 8 |
| 8 | 41 | 79 | 8 |
| 8.5 | 47 | 89 | 10 |
| 9 | 47 | 89 | 10 |
| 10 | 47 | 89 | 10 |
| 10.3 | 55 | 102 | 12 |
| 11 | 55 | 102 | 12 |
| 12 | 55 | 102 | 12 |
| 13 | 60 | 107 | 14 |
Model Number
TAC-HRESDR (Regular)
| Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
| 3 | 28 | 66 | 6 |
| 3.3 | 28 | 66 | 6 |
| 3.5 | 28 | 66 | 6 |
| 4 | 36 | 74 | 6 |
| 4.2 | 36 | 74 | 6 |
| 4.5 | 36 | 74 | 6 |
| 5 | 44 | 82 | 6 |
| 6 | 44 | 82 | 6 |
| 6.5 | 53 | 91 | 8 |
| 6.8 | 53 | 91 | 8 |
| 7 | 53 | 91 | 8 |
| 7.5 | 53 | 91 | 8 |
| 7.8 | 53 | 91 | 8 |
| 8 | 53 | 91 | 8 |
| 10 | 61 | 103 | 10 |
| 12 | 71 | 118 | 12 |
| 13 | 77 | 124 | 14 |
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● Internal lubrication enables cutting chips to be discharged efficiently and the lifetime of the tool is extended.
● Capable of high-feed, high-speed cutting on everything from general steel to stainless steel.
● Adopting a corrugated blade provides for outstanding sharpness and strength and also promotes the discharge of cutting chips.
● With three rakes + R-model thinning, high-speed cutting is achieved due to outstanding strength and stability.
● Chipping is prevented with a shoulder C-plane coating.
● Adopting a diameter plus tolerance allows holes to be finished with high accuracy closer to the hole tolerance and fewer hole diameter minus values after regrinding.
Informazioni di base
| Hole diameter (drill diameter) D(mm) | 4.2 | Groove Length L(mm) | 24 | work material | General Steel / Heat-Treated Steel / Acciaio inox / Ghisa / Rame |
|---|---|---|---|---|---|
| Tool Material Type | Carburo | Overall Length L(mm) | 66 | Shank Type | Punta a gambo dritto |
| Coating Y/N | Included | Coating Type | TiAlN | With/without Oil Hole | Included |
| Point Angle(°) | 140 | Thinning | Included | Shank Diameter d | 6 |
| Diameter Tolerance | +0.016 ~ +0.004 | Tolerance of Shank Diameter | 0 ~ -0.008 |
Si trova sulla pagina di TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular, il codice articolo è il seguente: TAC-HRESDB4.2.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TAC-HRESDB4.2.
Configura
Proprietà di base
-
Tipo
- TAC-HRESDB
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.