Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.
HR10 Dust-proof Cap (Codici componente - Download CAD)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
A dust-proof cap to prevent contamination from foreign bodies and protect the connected portion
● Prevents intrusion of dust and foreign matter to the fitting surface when mounted on unused panel mount receptacle.
· Does not have waterproof functionality.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
HR10-10R-C
Specifiche
| Model | Number of Cores | Weight g |
| HR10-7R-C | 4,6 | 0.3 |
| HR10-10R-C | 10,12 | 0.6 |
Più Informazioni
Codice componente
|
|---|
| HR10-10R-C |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | |
|---|---|---|---|---|---|
2.42 € | 1 | 5 giorni | 10 |
Loading...
Characteristics
| Item | Contents |
|---|---|
| Rated Current | 2 A or lower |
| Rated Voltage | 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC |
| Withstand Voltage | 300 VAC or less (500 VAC or less for 4-core) / 1 minute |
| Insulation Resistance | 1,000 MΩ or more / 100 VDC |
| Contact Resistance | 10 mΩ or less / 1 ADC |
| Compatible Wire Size | AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires |
* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Satin Nickel Plated |
| Pin Contact | Brass | Silver Plating |
| Socket Contact | Phosphor Bronze | Silver Plating |
| Insulator | Polyamide Resin | Black |
Contact Arrangement Diagram
Connection Work Method (Relay type can be done by the same method.)
| Number of Cores | Wrench Spacing (mm) | D Dimension (mm) | Wrench Tightening Force |
|---|---|---|---|
| 4.6 | 7.5 | 10 | 1.5 N・m (15 kgf・cm) |
| 10.12 | 9.5 | 16 | 1.5 N・m (15 kgf・cm) |
Connector Insertion and Removal Method
Si trova sulla pagina di HR10 Dust-proof Cap, il codice articolo è il seguente: HR10-10R-C.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto HR10-10R-C.
Configura
Proprietà di base
-
Filtrare per tipo dati CAD
- 2D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.