• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio / testa cilindrica / perno di forzatura / dispositivo antirotazione (Codici componente - Download CAD)

Punzoni da taglio / testa cilindrica / perno di forzatura / dispositivo antirotazione

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 55
  3. 56
  4. 57
  5. 58
  6. 59
  7. Avanti >>
Codice componente
G-SJVEX10-LMT[60.1-69.9/0.1]-P[5-9.97/0.01]-W[6-7.8/0.01]
G-SJVEX10-LMT[70.1-79.9/0.1]-P[5-9.97/0.01]-W[6-7.8/0.01]
G-SJVEX10-LMT[80.1-89.9/0.1]-P[5-9.97/0.01]-W[6-7.8/0.01]
G-SJVEX10-LMT[90.1-99.9/0.1]-P[5-9.97/0.01]-W[6-7.8/0.01]
G-SJVEX13-[70-100/10]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LC[33-49.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LC[50.1-59.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LC[60.1-69.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LC[70.1-79.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LC[80.1-89.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LC[90.1-99.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LCT[33-49.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LCT[50.1-59.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LCT[60.1-69.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LCT[70.1-79.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LCT[80.1-89.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LCT[90.1-99.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LMT[33-49.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LMT[50.1-59.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LMT[60.1-69.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LMT[70.1-79.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LMT[80.1-89.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
G-SJVEX13-LMT[90.1-99.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]
GH-PJEL4-[50-80/10]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LC[39-49.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LC[50.1-59.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LC[60.1-69.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LC[70.1-79.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LCT[39-49.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LCT[50.1-59.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LCT[60.1-69.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LCT[70.1-79.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LMT[39-49.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LMT[50.1-59.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LMT[60.1-69.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL4-LMT[70.1-79.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GH-PJEL5-[50-80/10]-P[2-4.97/0.01]-W[2-3.8/0.01]
GH-PJEL5-[50-80/10]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-[50-80/10]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GH-PJEL5-[50-80/10]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[39-49.9/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[39-49.9/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[39-49.9/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[39-49.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[50.1-59.9/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[50.1-59.9/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[50.1-59.9/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[50.1-59.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[60.1-69.9/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[60.1-69.9/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[60.1-69.9/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[60.1-69.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[70.1-79.9/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[70.1-79.9/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LC[70.1-79.9/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GH-PJEL5-LC[70.1-79.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LCT[39-49.9/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GH-PJEL5-LCT[39-49.9/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GH-PJEL5-LCT[39-49.9/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GH-PJEL5-LCT[39-49.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSJector Tip shape Material Surface treatment B (Tip length) D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		LCT (Head thickness tolerance change + Total length alteration)
(mm) 		LMT (Head thickness tolerance change + Total length alteration)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		WC (Tip dimension alteration)
(mm)

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX105 ～ 9.97---60.1 ～ 69.9--6 ～ 7.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX105 ～ 9.97---70.1 ～ 79.9--6 ～ 7.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX105 ～ 9.97---80.1 ～ 89.9--6 ～ 7.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX105 ～ 9.97---90.1 ～ 99.9--6 ～ 7.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.9770 ～ 100-----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97-33 ～ 49.9----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97-50.1 ～ 59.9----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97-60.1 ～ 69.9----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97-70.1 ～ 79.9----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97-80.1 ～ 89.9----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97-90.1 ～ 99.9----5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97--33 ～ 49.9---5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97--50.1 ～ 59.9---5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97--60.1 ～ 69.9---5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97--70.1 ～ 79.9---5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97--80.1 ～ 89.9---5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97--90.1 ～ 99.9---5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97---33 ～ 49.9--5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97---50.1 ～ 59.9--5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97---60.1 ～ 69.9--5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97---70.1 ～ 79.9--5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97---80.1 ～ 89.9--5 ～ 10.8-

-

1 Preventivo 10Spring reinforced typeESKD11 EquivalentNoneX135 ～ 12.97---90.1 ～ 99.9--5 ～ 10.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.9750 ～ 80-----2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97-39 ～ 49.9----2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97-50.1 ～ 59.9----2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97-60.1 ～ 69.9----2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97-70.1 ～ 79.9----2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97--39 ～ 49.9---2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97--50.1 ～ 59.9---2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97--60.1 ～ 69.9---2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97--70.1 ～ 79.9---2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97---39 ～ 49.9--2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97---50.1 ～ 59.9--2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97---60.1 ～ 69.9--2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL42 ～ 3.97---70.1 ～ 79.9--2 ～ 2.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.9750 ～ 80-----2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.9750 ～ 80------1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5-50 ～ 80---1.8 ～ 1.99-2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5-50 ～ 80---1.8 ～ 1.99--1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-39 ～ 49.9----2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-39 ～ 49.9-----1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--39 ～ 49.9--1.8 ～ 1.99-2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--39 ～ 49.9--1.8 ～ 1.99--1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-50.1 ～ 59.9----2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-50.1 ～ 59.9-----1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--50.1 ～ 59.9--1.8 ～ 1.99-2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--50.1 ～ 59.9--1.8 ～ 1.99--1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-60.1 ～ 69.9----2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-60.1 ～ 69.9-----1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--60.1 ～ 69.9--1.8 ～ 1.99-2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--60.1 ～ 69.9--1.8 ～ 1.99--1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-70.1 ～ 79.9----2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97-70.1 ～ 79.9-----1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--70.1 ～ 79.9--1.8 ～ 1.99-2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5--70.1 ～ 79.9--1.8 ～ 1.99--1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97--39 ～ 49.9---2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL52 ～ 4.97--39 ～ 49.9----1.8 ～ 1.99

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5---39 ～ 49.9-1.8 ～ 1.99-2 ～ 3.8-

-

1 Preventivo 10Standard typeEPowdered high-speed steelTiCNL5---39 ～ 49.9-1.8 ～ 1.99--1.8 ～ 1.99

Loading...

  1. << Indietro
  2. 55
  3. 56
  4. 57
  5. 58
  6. 59
  7. Avanti >>
 

Informazioni di base

Heavy-load punches No Shank type Single-stepped Shank (mounting part) shape Key flat
Shank diameter D tolerance +0.005/0 T (Head thickness/plate thickness)(mm) 5

Configura

Ripristina

5,520Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Jector

    • Standard type
    • Spring reinforced type

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Surface treatment

    • None
    • TiCN

    Ripristina

  • B (Tip length)

    • L
    • S
    • X

    Ripristina

  • D (Shank diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25

    Ripristina

  • P (Tip dimension)(mm)

     [1-24.97/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [32-100/0.1mmpezzi]

    Ripristina

  • LCT (Head thickness tolerance change + Total length alteration)(mm)

     [32-100/0.1mmpezzi]

    Ripristina

  • LMT (Head thickness tolerance change + Total length alteration)(mm)

     [32-100/0.1mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-5.99/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     

    Ripristina

  • W (Tip dimension)(mm)

     [1-22.8/0.01mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-6.99/0.01mmpezzi]

    Ripristina

  • Tipo

    • G-PJAL
    • G-PJAS
    • G-PJDL
    • G-PJDS
    • G-PJEL
    • G-PJES
    • G-PJGL
    • G-PJGS
    • G-PJRL
    • G-PJRS
    • G-PJVAL
    • G-PJVAS
    • G-PJVDL
    • G-PJVDS
    • G-PJVEL
    • G-PJVES
    • G-PJVGL
    • G-PJVGS
    • G-PJVRL
    • G-PJVRS
    • G-SJAL
    • G-SJAS
    • G-SJAX
    • G-SJDL
    • G-SJDS
    • G-SJDX
    • G-SJEL
    • G-SJES
    • G-SJEX
    • G-SJGL
    • G-SJGS
    • G-SJGX
    • G-SJRL
    • G-SJRS
    • G-SJRX
    • G-SJVAL
    • G-SJVAS
    • G-SJVAX
    • G-SJVDL
    • G-SJVDS
    • G-SJVDX
    • G-SJVEL
    • G-SJVES
    • G-SJVEX
    • G-SJVGL
    • G-SJVGS
    • G-SJVGX
    • G-SJVRL
    • G-SJVRS
    • G-SJVRX
    • GH-PJAL
    • GH-PJAS
    • GH-PJDL
    • GH-PJDS
    • GH-PJEL
    • GH-PJES
    • GH-PJGL
    • GH-PJGS
    • GH-PJRL
    • GH-PJRS
    • GH-PJVAL
    • GH-PJVAS
    • GH-PJVDL
    • GH-PJVDS
    • GH-PJVEL
    • GH-PJVES
    • GH-PJVGL
    • GH-PJVGS
    • GH-PJVRL
    • GH-PJVRS

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.